Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: IC Unit Clamps

  1. #1

    Join Date
    Sep 2006
    Location
    Reading, PA
    Posts
    161
    +1
    1

    IC Unit Clamps

    I had just heard that Sea-Doo put out a bulletin last night that they are replacing the clamps to the IC Unit because hoses are blowing off. Did anyone hear anything about that and is that more or less recall for all 2008 models or just the RXP-X or RXT-X

    Thanks


  2. #2
    cbrich's Avatar
    Join Date
    Nov 2006
    Location
    Around Lake Travis
    Posts
    1,374
    +1
    1
    Did they even mention what the fix was?

  3. #3

    Join Date
    Sep 2006
    Location
    Reading, PA
    Posts
    161
    +1
    1
    From what I have heard the fix is just a different style clamp. I'm not sure though.

  4. #4
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by Easternpariverrunners View Post
    I had just heard that Sea-Doo put out a bulletin last night that they are replacing the clamps to the IC Unit because hoses are blowing off. Did anyone hear anything about that and is that more or less recall for all 2008 models or just the RXP-X or RXT-X

    Thanks
    The X are the only 08,s with external intercoolers, so for the ic the recall would only be the X skis. As far as the exhaust, i know that all the 215 hp have the same water box so if they recall those clamps then it would be all with that box setup.

  5. #5
    my dealer did mention that there was a recall, but all they did to my ski was tighten the clamps...Im just going to do what everyone else has done and just replace all my clamps with t-bolt clamps

  6. #6
    Moderator The Bandit's Avatar
    Join Date
    Jul 2006
    Location
    Wilmette, IL
    Posts
    8,373
    Quote Originally Posted by gba View Post
    my dealer did mention that there was a recall, but all they did to my ski was tighten the clamps...Im just going to do what everyone else has done and just replace all my clamps with t-bolt clamps
    Bingo! easy fix.

  7. #7

    Join Date
    Sep 2006
    Location
    Reading, PA
    Posts
    161
    +1
    1
    Who sells these T- bolt clamps and how much are they roughly and how many do you need to replace?

  8. #8

    Join Date
    Jan 2008
    Location
    Clermont FL.
    Posts
    227

    hose blowing off

    I'm replacing all my clamps on my 05 RXP. Summit racing carries them for between 5 and 7 dollars apiece.

  9. #9

    Join Date
    Jul 2005
    Location
    Powhatan, VA
    Posts
    281
    Quote Originally Posted by GPRXP Steve View Post
    Bingo! easy fix.
    Im with you on the easy fix, but don't go back in on a recall, have a related problem and bet you will get the shaft on a warranty issue.
    I asked my dealer on me fixing and he says it has to be recorded that they performed the work. Im glad it is not in the middle of their busy season or I would probably not go in.

  10. #10
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by Easternpariverrunners View Post
    Who sells these T- bolt clamps and how much are they roughly and how many do you need to replace?
    This has been covered several times recentally but i will help you out anyway. You need 2 x 4.5 inch. You need 4 x 3 inch. Those are really the only ones with issues. If you want to do all exhaust for grins then get 4 more 3 inch. depending on were you buy them you are looking at 50 dollars or so, can be much higher, just depends on where you buy them.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Where I can buy T-Bolt Clamps for the X IC and which size?
    By Lbaronio in forum 4-Tec Performance
    Replies: 9
    Last Post: 02-18-2011, 09:16 PM
  2. IC flexpipes, couplers, t-bolt clamps
    By rxpblast in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 02-03-2009, 09:29 AM
  3. Replies: 1
    Last Post: 07-01-2008, 02:44 PM
  4. IC blockoff clamp HELP
    By rxpwhistler1 in forum 4-Tec Performance
    Replies: 11
    Last Post: 02-06-2008, 09:09 AM
  5. More IC AIRFLOW work, Rotax Unit...
    By Danny in forum 4-Tec Performance
    Replies: 25
    Last Post: 04-04-2007, 11:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •