Thread: Kawasaki Parts Diagrams are up
04-08-2008, 10:07 PM #1
Kawasaki Parts Diagrams are up
I was checking out the differences and superceeded parts of interest to me....
On the list of superceeds some are
drive shaft holder
vane guide cover (where engine cooling lines come from on pump)
differences altogether in one way or another
Items that were the same part number not superceeded: IGN Coils, pistons/rings, injectors, spark plugs, ignition rotor, blow off valve,
There are many more, most we've talked about alot of them, check it out.
Marc Kaman/Skip- can you chime in here to see if you can describe/photograph the differences since you have both 07 and 08? Dipstick, coupler, holder, dash meter????
04-09-2008, 07:07 AM #2
I had no idea about the coupler but it makes good sense as some issues with the Belt side coupler in 07 wedging against the motor then causing crank issues do to the pulley binding to the rear of the motor.
Got this tib bit from the PWC Offshore crew. I think?
Dash meter, looks the same too me.
Dipstick? I check mine out.
04-09-2008, 06:54 PM #3
Dip stick, seat and dash look the same.
those other things,,,,,well, that's Skips department
04-18-2008, 04:16 PM #4
04-18-2008, 07:15 PM #5
I wonder what they changed on the connecting rods?
I also wonder if the coupler binding problem Skip mentioned has anything to do with the rod failure some have experianced?
04-18-2008, 10:09 PM #6
04-19-2008, 06:58 PM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By chopper901 in forum Polaris ClassifiedsReplies: 4Last Post: 06-09-2009, 08:18 AM
By PWCdoc in forum Kawasaki ClassifiedsReplies: 19Last Post: 09-12-2008, 10:54 PM
By Whiplash in forum Kawasaki PWC Performance (4-stroke)Replies: 19Last Post: 10-28-2007, 07:20 PM
By ABBOTT in forum 4-Tec PerformanceReplies: 2Last Post: 08-15-2006, 06:01 PM
By howestek in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 03-27-2006, 07:48 PM