Results 1 to 7 of 7

Thread: Bypass?

  1. #1

    Join Date
    Nov 2007
    Location
    Lincoln, NE
    Posts
    332

    Bypass?

    I just asked this ? but I still dont know what to do. were do I put the water line going to the stock exhaust on my 06 RXP, I am now running a GB do you have to buy the waterline bypass bolt?


  2. #2
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    I got the bypass bolt and mounted it in the pump area just above the pump housing into the fiberglass it dumps the water right on top of the pump so when it is on the hose it get extra water on the pump. I did not wont it dumping on the deck or shooting out the side

  3. #3
    outboard john's Avatar
    Join Date
    Jun 2006
    Location
    Escondido, Ca.
    Posts
    474
    +1
    2
    I had a piece of aluminum tube welded to that last straight section of the GH box and hooked up the water line so it just dumps with the exhaust.

    OBJ

  4. #4
    heres where I put mine........the only problem is I get sprayed when there is a strong crosswind
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC04860.JPG 
Views:	88 
Size:	571.9 KB 
ID:	67675  

  5. #5
    dv8rxp's Avatar
    Join Date
    May 2005
    Location
    detroit
    Posts
    188
    Quote Originally Posted by cosmic View Post
    heres where I put mine........the only problem is I get sprayed when there is a strong crosswind

    I put mine in just about the same spot but mine is under the rub rail.

  6. #6
    lextoy's Avatar
    Join Date
    Jan 2007
    Location
    Brigantine, NJ
    Posts
    1,883
    +1
    14
    it is good as a telltale, lets you know water is flowing thru the system to cool.
    but most just dump it out in the pump area, there is already a place on the pump shoe to drill thru and mount it.

  7. #7
    sportster's Avatar
    Join Date
    May 2006
    Location
    St.Albert, Alberta, Canada
    Posts
    156
    I Put Mine In The Bombardier Rubber Grommet On The Back Side Of The Seat Cowling. If You Need The Cowling Off Just Have To Remove The Gear Clamp.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need four water bypass fittings.
    By ccassone in forum 2-Stroke Performance
    Replies: 2
    Last Post: 08-31-2006, 04:26 PM
  2. Water Bypass
    By BJTKRXPHD in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-21-2006, 07:26 PM
  3. Jetworks - FERCHO - Bypass loc on XLL 1200 on back of boat?
    By snowrunner in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-03-2006, 01:25 PM
  4. wideband O2 sensor bung & water bypass fitting installed
    By rapidacceleration in forum 4-Tec Performance
    Replies: 4
    Last Post: 02-25-2006, 07:51 PM
  5. Bypassing the Resonator
    By 1FastTrespiper in forum 4-Tec Performance
    Replies: 13
    Last Post: 08-12-2005, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •