Page 1 of 3 123 LastLast
Results 1 to 10 of 25
  1. #1

    Join Date
    May 2006
    Location
    down by the river in a van...
    Posts
    15

    Stock!! RXP vs RXT top end

    What can you expect for a real top end on these skis.

    Thanks!


  2. #2

    Join Date
    Jan 2006
    Location
    Puerto Rico
    Posts
    691

    Re: Stock!! RXP vs RXT top end

    Quote Originally Posted by 1gunner
    What can you expect for a real top end on these skis.

    Thanks!
    In smooth waters the RXP'S are like 2 to 3 MPH faster in the top end BUT in choppy waters they are no match for the RXT'S.

  3. #3
    and RXT's can do this with a keg in the front. RXP's with just a 6 pack

  4. #4
    12timeworldchamps's Avatar
    Join Date
    Feb 2006
    Location
    Maryland
    Posts
    431
    +1
    6
    RXT = 64 - 66. RXP = 67- 69. Remove OPAS and get another .5 or so.

    Ed

  5. #5
    GTXX's Avatar
    Join Date
    Jan 2006
    Location
    NW, GA
    Posts
    1,776
    put on an air intake and fill the ride plate holes on an RXT and you'll be right beside a stock RXP

  6. #6
    Quote Originally Posted by GTXX
    put on an air intake and fill the ride plate holes on an RXT and you'll be right beside a stock RXP
    and a repitched prop

  7. #7
    HOSS's Avatar
    Join Date
    Aug 2005
    Location
    Kenner, LA
    Posts
    4,700
    +1
    21
    Quote Originally Posted by GTXX
    put on an air intake and fill the ride plate holes on an RXT and you'll be right beside a stock RXP
    Did it with a 2 wedge and Riva grate.

  8. #8
    just finished a 06 rxt for a customer

    stock 65.7

    intake,impeller,pump wedge 68.9

    next week ,new ecu ,bigger injectors and intercooler upgrade

    hoping for 72 plus mph

  9. #9
    GTXX's Avatar
    Join Date
    Jan 2006
    Location
    NW, GA
    Posts
    1,776
    my RXT was 64.8 out of the box, PPG pipe, home built air intake and ride plate holes filled= 67.0. Have outran 5 stock RXP's to date in real world riding conditions.

  10. #10

    Join Date
    Jan 2006
    Location
    Puerto Rico
    Posts
    691
    Quote Originally Posted by GTXX
    my RXT was 64.8 out of the box, PPG pipe, home built air intake and ride plate holes filled= 67.0. Have outran 5 stock RXP's to date in real world riding conditions.
    Good job GTXX, put a complete Riva stage II (without the wedge) in that bad boy RXT of yours with a PPG "tweaked" 14/17R prop and a stock class RR ECU and i can assure you that none stage II RXP's from your riding area will touch your RXT in "real world riding conditions" i know very well what i am talking about since i ride almost every weekend with the two fastest (76 and 77 MPH) stage II RXP'S from my riding area

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stock 99' 1200 PV top end rebuild kits? Where's the best place to get the parts?
    By mrtinker in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-08-2011, 05:09 PM
  2. WTB Stock RXP X RXT X ecu, and 42 stock injectors.
    By otoss in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 09-17-2010, 07:40 AM
  3. gp1300 top end stock what is it
    By sal's adventures in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 02-24-2007, 11:41 AM
  4. 05 RXP HESITATION AT TOP END
    By JOSE13RT in forum 4-Tec Performance
    Replies: 9
    Last Post: 09-08-2006, 09:27 AM
  5. STOCK RXP/RXT INTERCOOLER
    By suck my wake in forum 4-Tec Performance
    Replies: 4
    Last Post: 04-20-2006, 01:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •