Thread: Electrical help
04-20-2008, 12:52 PM #1
I need ehlp identifying these electrical connectors on my conversion. I have the main wiring harness, the engine wiring harness, and the harness that has the DESS post and buzzer on it. The first three pics are connectors on the main harness, the second pic is a plug on the engine wiring harness, and the third is a plug on the buzzer/DESS post harness. Everything else I have figured out. I can not find the connector that plugs into the exh temp sensor on the waterbox either. Am I missing a harness?
Thanks in advance
And what are the 2 orange things on the buzzer/DESS harness? What am I supposed to do with those? The wires just "dead end" into them.
04-20-2008, 12:55 PM #2
how about pics with a better understanding of WHERE on the harness the connectors are located?
On the back of the engine are the two for the trim that aren't used.
04-20-2008, 12:56 PM #3
That double one looks like the regulator plug in.
04-20-2008, 01:15 PM #4
Mark, sorry, I guess I should have been a little clearer.
The first one is in the main harness and is bundles right next to the 6 term plug for the buzzer/DESS connector.
The second one is a 4 wire that comes off of the small DESS/buzzer harness.
The third one is in the engine harness and is in the loom with the idle speed motor plug and the knock sensor plug.
You are correct on the reg plugs. I forgot ALL about it.
04-20-2008, 01:27 PM #5
I'm gonna step aside and maybe somebody more knowledgeable can help. I don't have a ski opened up right now. If no one figures it out in the next couple of days I'll rip mine open and map it out.
Did you look in the wiring diagram? I bet they are all layed out in there.
04-20-2008, 01:29 PM #6
I just found another one that I dont know where it goes. If you look in this pic of the Spitfire electrical, there is something on the top right of the stainless bracket that holds the main electrical box. What is that? Sorry for the stupid questions, but I didnt take the donor apart.
04-20-2008, 01:30 PM #7
04-20-2008, 02:34 PM #8
04-20-2008, 02:35 PM #9
Either Tops Valve Or Starter Sol
04-20-2008, 09:18 PM #10
OK, I figured out just about all of them except for these. The 4 wire one comes off of the buzzer/DESS post harness. I would have to assume now that it is for the VTS which I am not using. The single wire one really has me baffled.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mrbtd in forum Open DiscussionReplies: 15Last Post: 01-07-2009, 03:24 PM
By Sundance in forum 4-Tec PerformanceReplies: 5Last Post: 12-10-2008, 07:07 PM
By waverider in forum 4-Tec PerformanceReplies: 3Last Post: 08-23-2008, 05:25 PM
By KirkF350 in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 03-10-2007, 10:48 AM
By KirkF350 in forum Kawasaki PWC Performance (2-stroke)Replies: 0Last Post: 11-11-2006, 08:20 PM