Results 1 to 6 of 6
  1. #1
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112

    removing driveshaft for impeller change.

    I know this is a pretty easy job but i was looking and saw you had to remove the driveshaft so you can remove the impeller how hard is it to put it back in it looks to me like it just pulls out can someone chime in on this please..thanks


  2. #2
    GPryan's Avatar
    Join Date
    Apr 2007
    Location
    Prairieville, LA
    Posts
    1,052
    +1
    25
    Removing the pump unit is simple and the driveshaft comes right with it. Putting it back in is the same just clean up the pump mating surfaces and reseal with threebond or equal.

  3. #3
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112
    so do you have to remove the batterybox etc. to reconnect the driveshaft from the inside or does it just go right in?
    Last edited by yami_rida#26; 04-20-2008 at 02:25 PM.

  4. #4
    GPryan's Avatar
    Join Date
    Apr 2007
    Location
    Prairieville, LA
    Posts
    1,052
    +1
    25
    No need to do anything from inside. It can all be done from the rear. The splines just slide in.

  5. #5
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112
    thanks for the info i see it really is pretty easy now

  6. #6
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB WANT TO TRADE coupler removal tool for impeller removal tool. :P
    By upgraded in forum Yamaha Classifieds
    Replies: 2
    Last Post: 03-09-2011, 07:29 PM
  2. where to get 12mm allen wrench for impeller removal
    By fcs1965 in forum 4-Tec Performance
    Replies: 10
    Last Post: 03-12-2009, 07:08 PM
  3. Impeller change/removal
    By tanski1218 in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 01-12-2009, 03:22 PM
  4. Impeller/change over question for slx
    By SideFX in forum Polaris Open Discussion
    Replies: 12
    Last Post: 07-13-2008, 02:55 PM
  5. Impeller removal, driveshaft
    By Kinchyle in forum 4-Tec Performance
    Replies: 4
    Last Post: 03-25-2006, 08:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •