Thread: Exciter coil?
04-23-2008, 04:46 PM #1
Got a no spark condition on a '99 SLH (the same one we just put a pump stator, etc on ) Went thru the whole t/s procedure and the only thing that checked bad was the exciter coil-590 ohms. The book calls for 1200. Everything else was in specs. Could this be the problem? I guess its there for a reason. K447, I expect a lengthy dissertation on how this works and why!
04-23-2008, 10:19 PM #2
did the ski have the updated stator in it? if it does u will get different readings...
04-25-2008, 07:23 AM #3
04-25-2008, 08:03 AM #4
i think its time for the update kit
04-25-2008, 11:19 AM #5
- Join Date
- Jul 2007
- Cedar Rapids,Iowa
Jay, Here's a quick test thanks to Jay from Alantic P/S. Try it.
If I could ad something here for you guys about the L/R Module(voltage regulator). If in any boat that the L/R Module powers up the ignition(orange jumper to the red/purple) and you think is giving you a no start condition do this. press and hold the bilge button down while crank the boat over and see if it starts/has spark. if it starts then you have a bad L/R. when you press the bilge button you bypass the L/R module. quick and easy trick. hope this helps.
Here's the thread it's from.
04-25-2008, 03:24 PM #6
04-25-2008, 03:32 PM #7
that test is only good if the stator is good...which by your readings is not...
04-26-2008, 01:00 AM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ExciterGPR in forum Yamaha PWC Performance (2-stroke)Replies: 100Last Post: 08-16-2008, 01:31 PM
By GeoRXT in forum 4-Tec PerformanceReplies: 3Last Post: 08-15-2006, 05:41 PM
By Green Hulk in forum Yamaha Open DiscussionReplies: 1Last Post: 07-16-2006, 11:06 PM
By jetworx hawaii in forum 4-Tec PerformanceReplies: 16Last Post: 02-27-2006, 11:04 AM
By WATER WOODY in forum Yamaha PWC Performance (2-stroke)Replies: 19Last Post: 01-29-2006, 11:16 AM