Results 1 to 5 of 5
  1. #1
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63

    some helpful thoughts

    ill start with the mods 17 of them 4" rear air,,2deg wedge, 42lb.inj, green wheel,makes [email protected], siliconintakes cooler,160deg stat,ride plate filed reverse bucket trimed, shorty mod water box, j-pipe trimed 14-19r riva grate resonator removed, skegs, opas blockedup, jerrys washers, ok--- the moter blubbers out of the hole, then smooths out and runs great,,#-2i my buddy ,,ill, call him chuck,, has a 07 with frunt air 14- 17 rride plate filed.and thats it and chuck smokes me ..... out of the hole and on top end ,,, chuck-o weights 30lbs less thani do any thoughts----- any one


  2. #2
    Vern's Avatar
    Join Date
    May 2005
    Location
    Grand Haven, MI
    Posts
    3,594
    +1
    128
    Top end ... a 14/19 4 blade is not enough prop with a stock nozzle with your setup, you should be able to pull a 15/20 easily and gain 2-3 mph on top end, you are quite likely hitting the rev limiter now. The blubbering on low end ... not sure ... are you positive your injectors are 42s? Have you pulled off the IC to TB hose to make sure your IC is not leaking any water?

  3. #3
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63

    helpful thoughts

    thanks vern,, well i bought the 42injectors from one of the guys in the form,, ,,iam shure he sold me the 42s,about the prop, should i tweak the 114-19 and if so how much,, or what 15-20 prop do think i should get

  4. #4
    Look up Dan and Jet Draft right next to the Glenn Cove Marina to get some more tips on making this faster!! If you haven't allready!

  5. #5
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63
    thanks for the tips,, you all know how much fun it is to sneak around doing some mods then smoke your bud , then to find out hees be ah, sneaking to i hate that but its all in good fun

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need some help guys, Lost 500rpm
    By CRS in forum 4-Tec Performance
    Replies: 13
    Last Post: 05-15-2006, 05:24 PM
  2. You may need to seek some help if....
    By Totallyblown in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 05-06-2006, 12:21 PM
  3. Need some help ?
    By RXP04 in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 04-20-2006, 04:36 PM
  4. SeaDoo 3D (need some help)
    By MARKUS in forum 2-Stroke Performance
    Replies: 21
    Last Post: 02-09-2006, 05:18 PM
  5. VFX Some help Bro????
    By 1 FAST VE in forum 4-Tec Performance
    Replies: 24
    Last Post: 10-29-2005, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •