Results 1 to 6 of 6
  1. #1

    Question 2000 GP1200 instruments not working....

    Anybody have any info on troubleshooting the instrument cluster on a 2000 GP1200? There is no sign of life. It is not lighting up or beeping. The boat otherwise runs fine. Checked fuses, plugs etc. Anybody doing repairs on them? They are 411.00 thru Yamaha. Thanks-Mark

  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Houston, Texas
    There are a couple of used ones in the classifieds

  3. #3

    Thumbs up Bench test GP instruments.....

    Thanks I`ll take a look. Is there any way to "bench test" one? -Mark

  4. #4
    hey i went through this a few weeks back with my 05... from what i gather its not worth it to fix.. the only way to trouble shout is to unplug the guage under front storage and make sure u have power coming in ... if your running in salt water it could just be a bad connection so clean it up and plug it in one more time... mine was getting power so was definatly a bad guage.. the 03 and earlier are easy to find. they go for about 150$ keep your eyes open or just write something in the classifieds. i ended up finding my 05 on ebay. but there are pleanty floating around here.

  5. #5
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    north jersey
    Quote Originally Posted by GigHarborPWC View Post
    Thanks I`ll take a look. Is there any way to "bench test" one? -Mark
    yes! download the manual in the tech section and perform the procedures.

  6. #6

    Thumbs up Did the testing.......

    Quote Originally Posted by addicted View Post
    yes! download the manual in the tech section and perform the procedures.
    Checked the manual again.

    Here`s the quote out of the manual " Display function"
    1. Check:
    Display function
    Not operate- Replace the multifuntion meter.

    I pulled the meter and gave it 12 volts to the red and black leads and did the jumpers but got nothing. Pulled the stainless ring that holds the rubber grommet. It has rust on the backside and you can see corrosion on the circuit board inside so I believe it`s done. If there is anything else I can do other than that let me know. The face looks sealed so repairing or replacing the circuit board doesn`t look like an option. Thanks for the help-Mark

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 gp1200 will not start. Does this thing have a fuel pump?
    By Banshee in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 02-07-2011, 08:12 PM
  2. Display not working 00 gp1200
    By ctct2118 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-01-2010, 07:57 AM
  3. 2000 kawasaki ultra 150 gas gauge not working HELP
    By dlimz in forum Kawasaki How To & FAQs
    Replies: 1
    Last Post: 05-22-2010, 08:34 PM
  4. Accelerator pump on 2000 SLX not working? help?
    By landmonster in forum Polaris PWC Performance
    Replies: 4
    Last Post: 10-02-2008, 11:54 AM
  5. 2000 14.5 (TWINS) - fuel gauge not working
    By brdouglas in forum Sea Doo Sport Boats
    Replies: 3
    Last Post: 08-15-2007, 06:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts