Thread: Engine flush STXR
04-27-2008, 02:31 PM #1
Engine flush STXR
I have a 2002 STXR in total stock condition. It has never been run in salt water. I was looking and can't find a flush on it. There is fitting with a rubber plug on the exhaust pipe. Where does a flush kit go on these? I want to start riding it in the ocean and bay.
04-27-2008, 02:40 PM #2
04-27-2008, 02:51 PM #3
On the exhaust pipe where that black cap is ...that is where you hook the flush atachment. On the 04 on up they have a kit built in so you can hook a hose right to it. On the 02 and 03 you have to buy a kit. Or make your self from a peice of water hose of the right size a hose fitting and the hose at your hose. All things you can get at home depot or lowes.
WHen your done put the black cap on. Really easy to make a kit.
Or ebay has them for about $22 shipped with a peice you can leave on ....home depot will be about $4 bucks..
Hope this helps.
04-27-2008, 03:05 PM #4
Thanks guys. I need that to be my salt ski.
04-27-2008, 03:12 PM #5
04-27-2008, 03:29 PM #6
Yes...although there are a couple differant ones. But do the same thing.
Now you see what it looks like ...you could make one for dirt cheap, or just order it if ya dont want to mess with it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Jetman150 in forum Sea Doo Open DiscussionReplies: 8Last Post: 09-19-2012, 10:30 PM
By matthew.dekorver in forum Yamaha Old School SkisReplies: 4Last Post: 07-05-2012, 08:18 PM
By seabird in forum Honda Open DiscussionReplies: 1Last Post: 10-17-2011, 11:02 AM
By macio in forum Yamaha Old School SkisReplies: 9Last Post: 06-04-2010, 07:10 AM
By davidl13 in forum Sea Doo Open DiscussionReplies: 1Last Post: 04-29-2006, 01:59 PM