Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289

    FS Lots of the best old school parts

    Will have good pics of everything soon.

    Raider triple pipe hull,loaded and ready for your motor or one of mine.

    hull includes
    Racepak 3 tack and cyl. head temp sensors
    custom switches
    custom seat
    FP triple pipes
    new Odessey dry battery
    new fuel cell
    all Aeroquip hose
    All hose clamps are aba 316 ss or better
    pump housing
    Protec intake grate
    realy too much to list the pics or a phone call would be the best way to tell whats there. $3000 obo

    TJ 65U 8mm big bore stroker with R&D/ Lamey power valve cylinder.complete with billet head and two sets of domes and one FP center chamber modded by TJ to clear the power valves.Just under 1300 cc motor has less than 15 hours on it, fresh hone and new rings,pins and pin bearings two new copper base gaskets. $3000 obo

    Big bore 1200 TJ ported flat top motor with less 10 hours. New Yamaha crank trued and welded by TJ, ported cases, copper base gasket,85.5 mm cyl. ported with new thick sleeves and set up for flat top pistons by TJ. Complete with Riva girdled head. $2000 obo

    Novi 48mm carbs like new $750 obo

    Novi 46mm carbs very good condition with Riva ported downdraft manifold $600 obo

    Riva sidedraft manifold with Gforce2 reeds $150

    Skat Trak 148mm 12 vane magnum pump, with two impellers swirl 16/27 and Dynafly 17/22, drive shaft new bearings,tail cone and Skat nozzle with replaceable rings.Like new $800 obo

    Skat Trak 155mm 6 vane Magnum pump with Dynafly machined by Skat to fit the 20mm pump shaft. This is basically an 05 pump that fits Raiders and GP1200s. $450obo

    More stuff later.


  2. #2
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289
    obo

  3. #3
    SkiOnDaBrain
    Join Date
    Aug 2007
    Location
    Owasso, OK
    Posts
    118
    PM sent.

  4. #4

    Join Date
    Oct 2006
    Location
    Plymouth, MA, USA
    Posts
    134
    +1
    1
    i would be intrested in the 148mm mag pump pics to [email protected]

    thanks

  5. #5
    All hail the Chief! fullboogie's Avatar
    Join Date
    Nov 2005
    Location
    Texas
    Posts
    3,155
    +1
    44
    This is one of the nicest skis I've ever seen, period. Darth is a maniac for detail.

  6. #6

    Join Date
    Feb 2008
    Location
    Ashford,Kent,UK
    Posts
    115
    PM sent on 46 Novi's you gonna reply?

  7. #7
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289
    Raider triple pipe hull,loaded and ready for your motor or one of mine.

    hull includes
    Racepak 3 tack and cyl. head temp sensors
    custom switches
    custom seat
    FP triple pipes
    new Odessey dry battery
    new fuel cell
    all Aeroquip hose
    All hose clamps are aba 316 ss or better
    pump housing
    Protec intake grate
    realy too much to list the pics or a phone call would be the best way to tell whats there. $2000 obo

    TJ 65U 8mm big bore stroker with R&D/ Lamey power valve cylinder.complete with billet head and two sets of domes and one FP center chamber modded by TJ to clear the power valves.Just under 1300 cc motor has less than 15 hours on it, fresh hone and new rings,pins and pin bearings two new copper base gaskets. $3000 obo

    Big bore 1200 TJ ported flat top motor with less 10 hours. New Yamaha crank trued and welded by TJ, ported cases, copper base gasket,85.5 mm cyl. ported with new thick sleeves and set up for flat top pistons by TJ. Complete with Riva girdled head. $2000 obo Sold

    Novi 48mm carbs like new $750 obo

    Novi 46mm carbs very good condition with Riva ported downdraft manifold $600 obo SOLD

    Riva sidedraft manifold with Gforce2 reeds $150

    Skat Trak 148mm 12 vane magnum pump, with two impellers swirl 16/27 and Dynafly 17/22, drive shaft new bearings,tail cone and Skat nozzle with replaceable rings.Like new $800 obo

    Skat Trak 155mm 6 vane Magnum pump with Dynafly machined by Skat to fit the 20mm pump shaft. This is basically an 05 pump that fits Raiders and GP1200s. $450obo On hold

    Complete MSD for 1100/1200 non pv motors $600

    MSD flywheel $125

    More stuff later.
    Last edited by Darthraider; 05-21-2008 at 10:03 PM.

  8. #8
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289
    Scat-Trak 155mm magnum pump. Complete from pump tunnel with Jet Dynamics intake grate and adapter blended in, Skat thick wear ring,12 vane stator, new solas 17/23 dynafly rehubed by Skat,Skat swirl 16/27,new bearings and Seadoo synthetic oil,Skat nozzle with two(84,85mm) replaceable rings and like new steering nozzle. $800 obo
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	PICT0063.JPG 
Views:	93 
Size:	2.25 MB 
ID:	75710   Click image for larger version. 

Name:	PICT0068.JPG 
Views:	110 
Size:	2.13 MB 
ID:	75711  

  9. #9
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289
    .
    Last edited by Darthraider; 06-03-2008 at 06:29 PM.

  10. #10
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289
    finally some time to post pics
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	PICT0047.JPG 
Views:	175 
Size:	2.23 MB 
ID:	75871   Click image for larger version. 

Name:	PICT0048.JPG 
Views:	147 
Size:	2.34 MB 
ID:	75872   Click image for larger version. 

Name:	PICT0049.JPG 
Views:	116 
Size:	2.25 MB 
ID:	75873   Click image for larger version. 

Name:	PICT0053.JPG 
Views:	87 
Size:	2.38 MB 
ID:	75874  

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS lots of Polaris SL 750 parts for sale
    By jarcynvicnchris93 in forum Polaris Classifieds
    Replies: 26
    Last Post: 06-02-2011, 07:59 PM
  2. FS: old school parts
    By addicted in forum Yamaha Classifieds
    Replies: 4
    Last Post: 09-14-2010, 10:25 PM
  3. FS Lots of GPR parts for sale
    By DaGoblinEatR in forum Yamaha Classifieds
    Replies: 32
    Last Post: 09-11-2009, 04:06 PM
  4. FS lots of parts from a 93 SL750
    By bufaloz01 in forum Polaris Classifieds
    Replies: 11
    Last Post: 06-08-2009, 07:33 PM
  5. FS: LOTS of Seadoo parts and a RXP-
    By texh20racer in forum Sea Doo Classifieds
    Replies: 10
    Last Post: 11-18-2008, 08:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •