05-08-2008, 08:42 PM #1
Want to Borrow: 15/20R or 14/19R for RXP
I bought a 15/20R from Fizzle, but we don't know if he pitched it or not. I want to borrow someone's UNTOUCHED 15/20R to see if I can turn it, and to compare it to the one that I have.
Also, I may be interested in a 14/19R to borrow if It turns out that I can't turn the 15/20.
Let me know if anyone is willing.
05-13-2008, 08:25 PM #2
Need References? Ask some of the guys from the South-Central Jersey Breakfast Club in the General Discussion area.
05-15-2008, 08:32 PM #3
I am going to take my prop out and check it to see if its pitched. If it isn't, I will be buying a 14/19 again. At which point, I will have 15/20 sitting on the shelf. If anyone ever needs to borrow one drop me a line.
05-15-2008, 08:39 PM #4
Not that what I say means anything but I'll vouch for Tim. He's good peeps.
We tease him a lot but he's a stand up guy and has bailed me out of a few jams recently with some bad sellers.
Tim, If I had one it would be at your house right now..
05-15-2008, 08:40 PM #5
- Join Date
- Oct 2005
Yeah, C`mon, someone step up to the plate and give this boy a hand!
05-15-2008, 09:29 PM #6
05-15-2008, 09:34 PM #7
stage 2 impeller, you'll be able to turn it
05-15-2008, 10:10 PM #8
I can lend you a watcon pitch gauge if you pay shipping. . . or maybe I can drop it off at Lenny's.
05-16-2008, 05:23 AM #9
I have the pitch gauge. Drew just let me borrow his. I am going to double check the pitch on it after I ride this weekend. I had a boost leak, which is now fixed, and I am going to test some more this weekend. If all is good, I don't need to borrow a prop. If I am still down on RPMs I am going to yank the prop and check it. If it's been tweaked, I was hoping to borrow an untouched 15/20 and give that a shot, if that still has me down on RPMs, I was going to borrow a 14/19 and give that a shot.
I was hoping to borrow before I buy. I of course would pay shipping both ways.
HOW ABOUT RENTING? I am willing to Rent one.
05-16-2008, 07:33 AM #10
IMO With your set up the 15-20 needs a mm taken out of it or get a greenwheel or Stage III. I had the same thing last year on a 06 RXP and the 15-20 was just a hair to big.
I went ahead and took 1mm out of it, but would have rather gone to a 14-19 with my skat nozzles.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By snowrunner in forum Sea Doo ClassifiedsReplies: 11Last Post: 08-10-2009, 02:21 PM
By jetskibum1 in forum Kawasaki Open DiscussionReplies: 0Last Post: 05-20-2009, 03:17 PM
By YamahaPat in forum Yamaha ClassifiedsReplies: 1Last Post: 05-05-2009, 12:56 PM
By cfgp927 in forum Yamaha ClassifiedsReplies: 14Last Post: 12-31-2008, 09:03 AM
By Chezzy in forum 4-Tec PerformanceReplies: 22Last Post: 01-21-2007, 06:47 PM