05-10-2008, 06:28 AM #1
XS IC with Stock Exh Setup (no Resi) Help?
ANyone running the XS setup with the stock exh outlet? Trying to figure out the best wat to route the exh hose from the water box to the 8" pipe. I have a RIVA front intake that uses even more of the available space.
05-10-2008, 07:21 AM #2
What I did was pull the stock Exhaust eixt out and cut the little locking tabs off, so the tip could be rotated. I rotated it 20% or so up and used two cut pieces off of my stock exhaust hose and a 90% Stainless L pipe.
Clamped it all togethere with T-bolt clamps.
I did this as I use a Riva type IC bracket. It will also fit you Rear 4inch intake perfect. This was also a must.
Here you go!
05-10-2008, 08:03 AM #3
hey your hands in the way.....
Great job on the setup
05-10-2008, 08:21 AM #4
LOL, It is pushing my homemade rear intake out of the way. This ski run 77 with simple cheap mods. I do not have a ton of money in it at all.
I even made the IC bracket.
Get it done......
05-10-2008, 08:33 AM #5
How's the drone everyone is talking about?
Thanks for the pic, need to head off to the muffler store. Any dimensions?
05-10-2008, 09:02 AM #6
I left the resonator and stock exhaust hose in place. Just real tight! I used an XS intercooler.
05-10-2008, 09:06 AM #7
05-10-2008, 09:14 AM #8
05-10-2008, 10:20 AM #9
Here are the only ones I could find. And there's one with a 4" front intake fitted.
05-10-2008, 10:23 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Xavier in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 10-14-2013, 02:54 PM
By thomas loh in forum 4-Tec PerformanceReplies: 0Last Post: 07-01-2012, 09:55 AM
By Jrsrxp in forum 4-Tec PerformanceReplies: 15Last Post: 09-30-2005, 05:57 AM
By macattack in forum 4-Tec PerformanceReplies: 1Last Post: 07-01-2005, 08:39 PM
By bling bling in forum 4-Tec PerformanceReplies: 24Last Post: 06-29-2005, 03:54 PM