Results 1 to 9 of 9

Thread: SBT pump parts?

  1. #1

    SBT pump parts?

    anybody try the SBT pump rebuild kits?? http://www.sbtontheweb.com/Merchant2...tegory_Code=72


  2. #2
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    I wouldn't. the OEM parts are not that much more.

  3. #3
    one of the bearings is 70 bucks?? the rest is around 40 for the seals and other bearing ! but I probably will go OEM

  4. #4
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    ? where? I just bought some a few months back from boats.net. I think the bearings were around $30 each and the seals were around 10.

  5. #5
    boats.net ! I just ordered everything accept the rear bearing ( hoping mines good? I swapped impellers and noticed the front seals were toast.
    I bought enough seals to redo all 3 ski's since the seals are cheap

  6. #6
    Moderator DrewNJ's Avatar
    Join Date
    Dec 2005
    Location
    Marlton, NJ
    Posts
    3,716
    +1
    1
    I rebuilt a 144mm seadoo pump with an SBT kit. Everything seemd fine. I actually liked the quality of the bearings better than the doo OEM but like the OEM seals better than the one's SBT provides... Overall I am happy with it..
    Doug

  7. #7
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    Just checked the online store and the bearings are 20 something bucks a piece. Way better off then some copy IMO!!

  8. #8
    Quote Originally Posted by Duke View Post
    Just checked the online store and the bearings are 20 something bucks a piece. Way better off then some copy IMO!!
    apparently the rear bearing is oem severe duty at 76 $ Are we on the same page? I can post part#'s if it helps??

  9. #9

    update

    Crazy find!! the99 xl 700 that I was looking up parts for has a bearing that cost 76 bucks?
    but the 98 xl 1200 has a 22 $ bearing? it's the same stator and everything! I wonder why they would change to a high dollar bearing?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. fs: VX pump parts
    By addicted in forum Yamaha Classifieds
    Replies: 4
    Last Post: 05-18-2009, 06:11 PM
  2. Required 05 Pump Parts for XLL/ XLT?
    By snowrunner in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 04-06-2007, 11:55 AM
  3. powder coating intake & pump parts. Smooth surface hull bottom?
    By JDS GP1200 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 11-20-2006, 02:04 PM
  4. Oil pump parts after clutch failure
    By SplishSplash in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-27-2006, 08:03 AM
  5. Missing pump parts..need nut size so I can steer...
    By MPower in forum Yamaha PWC Performance (2-stroke)
    Replies: 16
    Last Post: 05-26-2006, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •