Hulk can you PM me the cost of paint change

[bling bling]

Or post it here . I am really liking the blue and black .

[Peligroso]

Bling, to change the paint color all depends if you get new parts first and have them paited or just take the ones off that you have and paint those. Mine was more expensive then jerry due to me buing all the new components. My old stuff is all black now and on Jerry's ski. The painting in itself only costed me $300, but getting the compontes is what killed me. Other then that, it was not to bad. Hope this help's some.

[bling bling]

Bling, to change the paint color all depends if you get new parts first and have them paited or just take the ones off that you have and paint those. Mine was more expensive then jerry due to me buing all the new components. My old stuff is all black now and on Jerry's ski. The painting in itself only costed me $300, but getting the compontes is what killed me. Other then that, it was not to bad. Hope this help's some.

Yeah yo gave me the list i cannot afford to by new parts so i would have to disassemble and have painted . i dont know where i would find the blue grab bar and rub rails

[bling bling]

How do you get the little green painted that is on the side with the form silver pad

[Peligroso]

When you remove all the other parts, just remove the 6 screws that are holding it on. The plastic that is under the foam is help on to the ski by those six screws. Do not try to pull the faom off to remove the plastic though, those six screws actually go into the foam. It is easy to get to though once you have all the other fairing parts and the hood off. Now only other thing I recommend and I said the same thing to Jerry when he asked, is to make sure that your tools are on a line attached to you so they do not drop into your ski, I almost did that but thankfully I had it attached to a line on my wrist.

[Green Hulk]

bling, it did not cost me a dime because i know the guy that owns my local body shop.

You can have all of your current green plastic parts painted!

The blue looks hot!!!

[bling bling]

alright what color paint code would that blue be ?

[Peligroso]

I have not seen a blue one yet, I would find a shade of blue that you like and test it first to make sure that it will look good, so not sure on a paint code. As for the grab bar and rub rails, I am not sure how you would paint those. i know there are paints out there for bumpers and such that might work, but make sure you check with a local paint place first to make sure that it will hold up in the water.

[bling bling]

I have not seen a blue one yet, I would find a shade of blue that you like and test it first to make sure that it will look good, so not sure on a paint code. As for the grab bar and rub rails, I am not sure how you would paint those. i know there are paints out there for bumpers and such that might work, but make sure you check with a local paint place first to make sure that it will hold up in the water.

Thanks

[MikeTrin]

I used black SEM spray paint on my green grab bar and the cushion on the seat cover thing. There is also Krylon Fusion.