Thread: ZXI not getting any power
05-17-2008, 09:32 PM #1
- Join Date
- Apr 2007
ZXI not getting any power
I have a 1996 zxi900.Its was working fine then one day went to start it and it was dead.Charged it up it started right up.left it the next day it was dead got a new battery and hooked it up and now its still dead wont click nothing.starter seem to be working fine .it seems like it getting know power checked the fuses there good .is there something am missing help anyone.thanks doug
05-18-2008, 11:57 PM #2
You need to see how many amps the starter is pulling BUT it sounds like the starter is dead or the relay.
Check to see if the starter is getting power
use a 12 volt light with test clip wires I am not sure if you can get to the POS post on the stater and put one wire clip on the post making sure that it is not touching anything and clip it to the test light or bulb and run a wire to ground from the bulb or test light.
I like Alligator Clip Test Leads or a test light with the clips to keep my hands free to hit the starter button
Or clip onto the leads of a spare a trailer light or just a bulb
Hope this helps PM me if you need pictures of the bulb set up
Last edited by termite; 05-19-2008 at 12:00 AM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Whiskigirl in forum Polaris Open DiscussionReplies: 3Last Post: 07-05-2013, 01:51 PM
By 97ywrgp1200 in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 06-22-2013, 03:56 PM
By jhill19 in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 06-08-2012, 09:41 PM
By grifter in forum Kawasaki How To & FAQsReplies: 0Last Post: 05-18-2008, 07:50 PM
By NateGP1300R in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 05-30-2007, 12:11 AM