Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
  1. #1
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,069
    +1
    790

    Rode Sundances RXP-X

    Guys I was able to get a ride on Rays RXP-X yesturday for a test Ride.
    BOY it is fun! Too compare with, I have 1 of my RXP's set up with a STG III SCer and IC with 4 icnh rear air intake.

    I can honestly say they are dam near the same. No B.s. His ski pulls hard from a get go all the way to low to mid 70's. The steering on the X is just awesome. I looked it over compared to my UMI and it is dam near the same thing. His ski handled better than mine as he has skegs and Riva pro block offs already.
    It Ran 7900Rpm's with not even 1 hour on it and a 15-22R. So I am sure when it breaks in a little more he will see 8000 R's and around 75. He is still waiting on the Riva grate. All in all if you don't want to mess with a ski and just want a Dang fast boat. Just get the RXP-X and a Riva STG I and you are better than a STG II+ normal RXP with no headaches with a install of a IC and all that.

    His mods are:
    Riva power filter
    15-22R
    Skegs
    Riva Pro BO's.

    Thats it.

    .

    .


  2. #2
    MPower's Avatar
    Join Date
    May 2005
    Location
    Raleigh, NC
    Posts
    3,340
    +1
    121
    Is he still running the stock intake grate? If so, thats where his missing RPM's are I bet.

  3. #3
    The riva grates have been shipped out right?

  4. #4
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,069
    +1
    790
    Quote Originally Posted by MPower View Post
    Is he still running the stock intake grate? If so, thats where his missing RPM's are I bet.

    Yes, With the stock grate as of now. The Riva grate is not here yet.

    And yes again that grate is like a anchor, but it dam sure would be awesome in rough water IMO.

    So I would guess with the Riva grate he will gain a 100 or so RPM's and speed.


    .

  5. #5
    REID2168's Avatar
    Join Date
    Jun 2007
    Location
    My House
    Posts
    8,156
    +1
    241
    i hope u guys are drilling the holes in the pump shoe ride plate and intake grate before u go much faster ...........good luck Fellas!

  6. #6
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,069
    +1
    790
    Quote Originally Posted by REID2168 View Post
    i hope u guys are drilling the holes in the pump shoe ride plate and intake grate before u go much faster ...........good luck Fellas!

    NOPE, gonna just wait for the Riva grate. He isn't plaining on Running her to the max without the Riva grate.

    .

  7. #7
    Moderator Franko's Avatar
    Join Date
    Apr 2005
    Location
    Dallas, Texas
    Posts
    3,829
    +1
    2
    Congrats Ray. The P-X is an awesome machine. I knew you would like it. So Austin, when are you getting one?

  8. #8
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,069
    +1
    790
    Quote Originally Posted by Franko View Post
    Congrats Ray. The P-X is an awesome machine. I knew you would like it. So Austin, when are you getting one?

    I new the question would come up sooner or latter. Ray and I spoke about this same thing. And it comes down to one thing. REHAB! Screwed up my Neck bad and have been in Rehab for over a month. But all is well.

    ./

  9. #9
    Moderator Franko's Avatar
    Join Date
    Apr 2005
    Location
    Dallas, Texas
    Posts
    3,829
    +1
    2
    Quote Originally Posted by Water4fire View Post
    I new the question would come up sooner or latter. Ray and I spoke about this same thing. And it comes down to one thing. REHAB! Screwed up my Neck bad and have been in Rehab for over a month. But all is well.

    ./
    Damn, sorry to hear that Austin. Take care of yourself first. Then go buy a ski for your troubles.

  10. #10
    REID2168's Avatar
    Join Date
    Jun 2007
    Location
    My House
    Posts
    8,156
    +1
    241
    Quote Originally Posted by Water4fire View Post
    NOPE, gonna just wait for the Riva grate. He isn't plaining on Running her to the max without the Riva grate.

    .

    thats playing with FIRE assuming the grate is a SOLVE ALL for the pump stuff issue past Rivas claimed speeds!!!!!!! hope things work out fellas but IMO Ray u should drill the holes before u experience a buck! .......be safe & good luck!

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rode Turbo RXP today......WOW!!!
    By rob1086 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-08-2008, 12:39 PM
  2. Man I rode Stan RXP-X all I got to say Is Dang
    By racerrob333 in forum 4-Tec Performance
    Replies: 33
    Last Post: 01-30-2008, 10:42 PM
  3. I rode the RXP-X demo at the World Finals
    By rxprsn in forum 4-Tec Performance
    Replies: 61
    Last Post: 10-17-2007, 07:08 PM
  4. i rode a rxp stage 3 today....dahm
    By pet in forum 4-Tec Performance
    Replies: 47
    Last Post: 09-18-2007, 09:03 AM
  5. rode with RXP DAN
    By great lakes gpr 1200 in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 10-08-2006, 06:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •