Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112

    13/19 DF and a milled head

    Hi guys, I have an 07 gpr all the mods are listed in my signature besides the d-plate,"race" flame arrestor and EFI controller do you think with a milled stock head to yield 150/150/145 psi would be too much on my 13/19 causing me to upgrade to a 14/20 DF thanks, Chaz
    Last edited by yami_rida#26; 05-20-2008 at 04:54 PM.


  2. #2
    PuprleNuprleGPR's Avatar
    Join Date
    Jul 2006
    Location
    Central FL
    Posts
    741
    What happened to the Nujet?

  3. #3
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112
    Check i sent for it got lost..Sorry about that guys I was really looking forward to testing out and sharing my results..

  4. #4
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    you could send another check

  5. #5

    Join Date
    Jan 2007
    Location
    Milwaukee, Wisconsin, United States
    Posts
    773
    +1
    1
    KEYWAY. D Plate Then change props?

    I may trade with you if you wnat 14/20

    but lets wait until I try out the new set up.

  6. #6

    Join Date
    Jan 2007
    Location
    Milwaukee, Wisconsin, United States
    Posts
    773
    +1
    1
    You can mill your head or you can swap with me again. I have oem milled head has a seeper look to it LOL

    I am getting R&D head soon

    PM Me we can talk

  7. #7
    ecpChris's Avatar
    Join Date
    Jul 2007
    Location
    ocean county nj
    Posts
    2,912
    +1
    427
    with a milled head you would def need 14/20 i think it would be too much for the 13/19. I had basically the same mods give or take and I even spun the 14/20 ~ 7200 rpms. I added a keyway and its pretty much time to repitch

  8. #8
    yami_rida#26's Avatar
    Join Date
    Oct 2007
    Location
    Cayman Islands
    Posts
    2,112
    I just have had nothing but bad experiences sending checks but i have a friend with a paypal account and he is going to send the money for me and i'll pay him back for it so i am getting the Nujet prop again

  9. #9
    OK, I'm confused. It says you have an 07' GPR, if so the nu-jet may not work unless it's the new one that nobody has tried or seen. The old nu-jet 6.5 is for 04' and older pumps.

  10. #10
    GPryan's Avatar
    Join Date
    Apr 2007
    Location
    Prairieville, LA
    Posts
    1,052
    +1
    25
    He was going to be the first person to try the new nujet for the 05 pump.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 13-19 DF
    By JIEBOY in forum Yamaha PWC Performance (2-stroke)
    Replies: 30
    Last Post: 11-12-2008, 03:25 PM
  2. Looking 2 buy afthermanker heads,jets,stock carbs and 13/19 prop
    By Gio GP1200R in forum Yamaha Classifieds
    Replies: 2
    Last Post: 09-01-2008, 07:09 PM
  3. FS: GP1300R Ride Plate and GP1200R Milled Head
    By LS2000 Cop in forum Yamaha Classifieds
    Replies: 3
    Last Post: 08-27-2008, 06:44 AM
  4. Stock prop or 13/19 DF
    By yami_rida#26 in forum Yamaha PWC Performance (2-stroke)
    Replies: 19
    Last Post: 04-12-2008, 06:42 PM
  5. Milled head and 89 octane?
    By jfoster in forum Yamaha PWC Performance (2-stroke)
    Replies: 15
    Last Post: 04-07-2007, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •