Thread: Info Air intake Stock RXP
05-21-2008, 11:20 AM #1
Info Air intake Stock RXPI don't find it in the forum so i need to ask you.....
I need to know the diameter of the tube going "in" to the s/c because i need to build an air intake by myself.
So i need the measure of the stock s/c and the stock tube.
TNX very much
05-21-2008, 11:36 AM #2
05-22-2008, 03:15 AM #3
Thank you very much. For the filter which is the best one type? do i need a marine filter or any normal filter?
I would like to put a 4" filter .
Could you give me some models?
05-22-2008, 06:48 AM #4
- Join Date
- Aug 2007
- Sparrows Point, MD (near the Key Bridge)
Most people buy the 4" velocity stack and run kanaflex up to the front with a 4" stainless mesh filter. Currently Im testing out a 4" system using drainage pvc pipe, so far looks promising, but im waiting on getting the SC washer replaced before I will know for sure if it will work.
9735 is the part number for the spectre filter, I got lucky and my work decided to carry them the week after I started building my intake.
05-22-2008, 08:13 AM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By s/d-daddy in forum 4-Tec PerformanceReplies: 4Last Post: 08-26-2010, 02:34 AM
By rxpwhistler1 in forum Sea Doo ClassifiedsReplies: 10Last Post: 02-18-2010, 10:56 AM
By rxpredviper in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-10-2009, 08:14 PM
By WebmasterRXP in forum Sea Doo ClassifiedsReplies: 3Last Post: 06-25-2008, 04:34 PM
By powertek in forum Sea Doo ClassifiedsReplies: 3Last Post: 06-10-2008, 03:56 PM