Results 1 to 4 of 4
  1. #1
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,072
    +1
    790

    Well SCer maintenance and look what I found!

    Guys this was the SCer I bought that came off of TWO2's ski.
    After reshimming it, I decided to pull it apart as I had some silver dust in the IC hoses. Look what I found. I know they are supposed to touch some, but Is this normal? This SCer was sent off by mike to be rebalance and trued from mark at Racetech after it had a touch down before. I just need to know if most look like this. I have seen most have slight to moderate touchdowns , but not like this.

    What do you guys think? Still good to go????

    ..


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Doesn't look that bad. The scores you see in the impeller are from the previous touch down. I remember when Mike sent that impeller off to be rebalanced. you are good to go.

    Make sure you don't have a lot of "in out" play in your shaft that would cause a touch down.

  3. #3
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,072
    +1
    790
    Jerry, Mark rebuilt it before it was sent to me. i think it has like 15 hours on it. I just didn't like the excessive Silver dust. It has no in out play and was at 70ish in lbs until today. (130)


    .

  4. #4

    Join Date
    Jan 2006
    Location
    Rydal, Georgia U S A
    Posts
    3,936
    +1
    14
    The runout should be NO MORE than .008. If it is; BEARINGS INSTALLED CORRECTLY! SOME PPL PUT THEM IN BACKWARDS or hammer them bc there to....._____ to do it correctly. I've been replacing bearings every 10 hours for safety. My X ski at 14 hours had one starting to go... a rough spot in it next to the fan and it left a little oil in the tube. There's your sign, oil or dust. Or it's castings and fan and brgs...$600 and a mess to clean up

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Look what I found today
    By Smitty in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 07-08-2008, 01:05 PM
  2. Look what I found when pulling the head??!!
    By jpa1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 27
    Last Post: 06-23-2008, 10:21 PM
  3. Hang out with Georxt and look what happens
    By miamirider in forum 4-Tec Performance
    Replies: 34
    Last Post: 03-28-2008, 06:16 PM
  4. Look what I found...
    By Rodneyae in forum Polaris Open Discussion
    Replies: 11
    Last Post: 12-17-2007, 11:15 AM
  5. We invite the Yammie guys in and look what happens
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 08-04-2006, 03:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •