Results 1 to 5 of 5
  1. #1
    dv8rxp's Avatar
    Join Date
    May 2005
    Location
    detroit
    Posts
    188

    sc clutch shims?

    Anyone know of any local type source for the sc shims? like an auto parts store, hardware store, or tractor suply. My sc is slipping badly and I would like to fix it today so I can get out there.


  2. #2
    MIARider's Avatar
    Join Date
    Aug 2007
    Location
    S. Florida
    Posts
    1,430
    not local, but im sure Jerry has them and can get them to you in two shakes of a lambs tail. I wouldnt risk putting anything else in there.

  3. #3
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    If shes slipping that bad i would forget the shims and put new spring washers in.

  4. #4
    dv8rxp's Avatar
    Join Date
    May 2005
    Location
    detroit
    Posts
    188
    It's a brand new sc. It was shipped to me from brp, then I shipped it out to get the metal washers and rr wheel in it. Ive had it on the water 3 times and the performance kept getting worse, so I took off the intake to check the slip, and I didnt even get a number it moves with just the wieght of the wrench . and yes I did put a stick in the prop to stop the crank from moving. I'm gonna take it apart and see if it was even put together properly. Ive been chasing problems with this ski ever since I got it back from getting the engine rebuilt.
    Last edited by dv8rxp; 05-26-2008 at 12:38 AM.

  5. #5
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Me personally i would take it out and bench test the slip..Check the gear also make sure its within specs..also make sure they installed the spring washers the right way...I cant see a 3 hour old SC having that bad of a slip issue,especially with new metal washers...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Anyone had PPG install SC clutch?
    By rx4pain in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-21-2005, 06:19 PM
  2. Replies: 22
    Last Post: 07-13-2005, 09:33 PM
  3. sc clutch gone at 14 hours?!
    By mxl16 in forum 4-Tec Performance
    Replies: 19
    Last Post: 07-06-2005, 08:32 PM
  4. clutch shims
    By INDY27 in forum 4-Tec Performance
    Replies: 6
    Last Post: 06-14-2005, 04:26 PM
  5. Anybody has an expoded view for the RXP SC Clutch ??
    By rxp_boy in forum 4-Tec Performance
    Replies: 18
    Last Post: 06-01-2005, 07:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •