Thread: Ultra 250X prop bending
05-26-2008, 06:54 AM #1
Ultra 250X prop bending
Anyone here bend there prop to get the right RPMs. I got a Stage 1 thats pulling a best of 68.5GPS @ 7700 RPM. Do you think pulling 1mm out of the trailing edge will give me another 100 RPM 1 MPH and more accelleration?
Last edited by Antiguan FZR; 05-26-2008 at 07:27 AM.
05-26-2008, 07:06 AM #2
to be honest I dont know enough about bending props , I am sure it has its place,
I am turning 8150>8190 inspikes on a STD prop
So I think you rpm's are still stuck some where else, I feel get the STD prop rpm up before you start bending
Just my 2cents
I mean if you get as much as you can on STD prop, when you do bend you will getthe best of both world
05-26-2008, 07:28 AM #3
Tank was 1/2 and some gear at front.
Ski has 3hours only!!!
Seems i got a fast one this year!
Air temp was 28C.
Superman gave me 0.5-0.8mph believe it or not!!!!
I broke it like i stole it from T2 and he was after me with a minigun.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
FS - Parts Stock Prop for Kawasaki ULTRA 250XBy Socaloffshore in forum Kawasaki ClassifiedsReplies: 0Last Post: 06-15-2013, 11:31 AM
By jmatak9 in forum Kawasaki ClassifiedsReplies: 1Last Post: 12-31-2010, 04:03 PM
By Huter Boi in forum Kawasaki ClassifiedsReplies: 0Last Post: 09-26-2009, 08:52 PM
By Kawi-Guy in forum Kawasaki ClassifiedsReplies: 12Last Post: 02-17-2009, 01:04 AM
By PAINKILLER in forum Sea Doo Open DiscussionReplies: 2Last Post: 10-09-2005, 06:18 PM