Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1
    bavboym3's Avatar
    Join Date
    Mar 2008
    Location
    Pittsburgh, PA
    Posts
    234
    +1
    6

    RXP-X issue!! HELP

    So I have 2hrs on my boat, going on three. I am doing a very easy going break in. Let her warm up, keep low rpms, and rev it up for 3 sec blast just to give her a full healthy break in...

    So Sunday afternoon, I take her out..

    Ride for 20mins, easy few quick full throttles..

    About to bring her in, and I go for one last blast, and the boat will only rev to 5800...??? Wont go above it??

    I immedietly park it, cause im concerned.

    I pull it out of the water, check the coils/sparks, and check the pump section. Everything seems fine?

    I brought it to the jetski shop, and they are going to research the problem.. They really are not sure though?

    Any ideas??

    Could it have adjusted itself into learning mode? Could my 3rd cylinder be bad? Im scaring myself!

    HELP!
    Last edited by bavboym3; 05-30-2008 at 04:32 PM.


  2. #2
    Kiwi spanner handler
    Join Date
    Dec 2007
    Location
    Christchurch NewZealand
    Posts
    579
    +1
    13
    possibly fouled a plug i doubt it will be anything serious.

  3. #3
    Avion3333's Avatar
    Join Date
    Dec 2007
    Location
    Cayman Islands
    Posts
    686
    Quote Originally Posted by bavboym3 View Post
    So I have 2hrs on my boat, going on three. I am doing a very easy going break in. Let her warm up, keep low rpms, and rev it up for 3 sec blast just to give her a full healthy break in...

    So Sunday afternoon, I take her out..

    Ride for 20mins, easy few quick full throttles..

    About to bring her in, and I go for one last blast, and the boat will only rev to 5800...??? Wont go above it??

    I immedietly park it, cause im concerned.

    I pull it out of the water, check the coils/sparks, and check the pump section. Everything seems fine?

    I brought it to the jetski shop, and they are going to research the problem.. They really are not sure though?

    Any ideas??

    Could it have adjusted itself into learning mode? Could my 3rd cylinder be bad? Im scaring myself!

    HELP!
    is the bike vibrating?

  4. #4
    i make, break, and fix things 08255's Avatar
    Join Date
    Mar 2008
    Location
    NOVA - Pohick Bay/Lake Anna
    Posts
    285
    check the hoses...my SC outlet hose fell off (crappy hose clamps) and it was a straight turd....i put money thats your problem.

  5. #5
    Yamaha tow boat RIDEALLDAY's Avatar
    Join Date
    Feb 2006
    Location
    Texas
    Posts
    1,447
    Quote Originally Posted by 08255 View Post
    check the hoses...my SC outlet hose fell off (crappy hose clamps) and it was a straight turd....i put money thats your problem.
    +1

  6. #6
    bavboym3's Avatar
    Join Date
    Mar 2008
    Location
    Pittsburgh, PA
    Posts
    234
    +1
    6
    its not vibrating. And I can here the sc whine. Just won't rev over 6k.. Could it be this sc outlet hose?

  7. #7
    Avion3333's Avatar
    Join Date
    Dec 2007
    Location
    Cayman Islands
    Posts
    686
    Quote Originally Posted by bavboym3 View Post
    its not vibrating. And I can here the sc whine. Just won't rev over 6k.. Could it be this sc outlet hose?
    well if it's not vibrating it the sc outlet hose

  8. #8
    bavboym3's Avatar
    Join Date
    Mar 2008
    Location
    Pittsburgh, PA
    Posts
    234
    +1
    6
    Quote Originally Posted by Avion3333 View Post
    well if it's not vibrating it the sc outlet hose
    its def not vibrating. Its almost like the learning key is in.

  9. #9
    bavboym3's Avatar
    Join Date
    Mar 2008
    Location
    Pittsburgh, PA
    Posts
    234
    +1
    6
    Quote Originally Posted by Avion3333 View Post
    well if it's not vibrating it the sc outlet hose
    so you guys def think its this sc outlet?

  10. #10
    i make, break, and fix things 08255's Avatar
    Join Date
    Mar 2008
    Location
    NOVA - Pohick Bay/Lake Anna
    Posts
    285
    yes. i knew something was wrong immediatly and i also noticed how i could hear the SC was a lot more audible. that is your problem. you need some nice new t-bolt clamps on that jammy! there is a full thread on this...so go get it back from the dealer and do it yourself and save some moolah

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HELP---RXP oil issues--HELP
    By rxp747 in forum 4-Tec Performance
    Replies: 4
    Last Post: 08-18-2011, 08:17 PM
  2. never ending charging issue for my rxp 2007 215hp HELP!!
    By rami_13b in forum 4-Tec Performance
    Replies: 15
    Last Post: 09-12-2009, 08:40 PM
  3. 06 RXP VTS Issues...HELP!
    By pjr170 in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 08-08-2009, 08:45 AM
  4. Help With RXP Electrical Issue
    By JeffSki in forum 4-Tec Performance
    Replies: 3
    Last Post: 01-11-2009, 01:44 PM
  5. RXP vibration issue HELP!
    By inteljd in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 08-19-2007, 11:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •