Results 1 to 9 of 9
  1. #1

    Post your RIVA RXP Stage 1 numbers

    List if you guys have done anything else too, like filled in ride plate holes, trimmed reverse bucket, or are using skegs.

    I ran a best of 71.3mph @ 8100 RPM with 1/2 tank in 70F with about 30~40% humidity. I also ran 71.1, 71.0, 71.0, and a couple 70.6~70.8mph. I have my ride plate holes filled and I have RIVA pro opas blocks. Next time I will trim the reverse bucket and silicone my intake grate and its bolt holes.


  2. #2
    Legend in my own mind Sirhc7897's Avatar
    Join Date
    Aug 2005
    Location
    Lake Butler, FL.
    Posts
    1,140
    On mine with the ride plate holes filled and the thermostat I was steady 72.0-72.5ish under half a tank...I would see almost 73 but it would porpoise violently nearing 73...This was in Florida spring weather (low to mid 80's, decent humidity, etc...) RPM's were right a 8100-8150...

  3. #3
    ramnj's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    1,713
    With the Stg 1 I was running 72+ with half tank of gas. I also had the Riva sponsons and Riva Pro Blockoffs.

  4. #4
    daverxp4's Avatar
    Join Date
    Aug 2005
    Location
    montreal,canada
    Posts
    1,323
    with stage 1 ran 73.9 mph consistantly ride plate filled and still holding.

  5. #5
    Dang, you guys are running good.

    I notice my reverse bucket is blocking my pump about an inch maybe less. How much speed do you think I will gain by trimming it?

  6. #6
    our 06' RXT has hit 70.7mph at 8120rpms with a level 1 kit from Scott's performance .

  7. #7

    Join Date
    Jun 2006
    Location
    Lake Lanier, GA
    Posts
    12
    Quote Originally Posted by beachboy66
    our 06' RXT has hit 70.7mph at 8120rpms with a level 1 kit from Scott's performance .
    What mods are included in the Level 1 kit?

  8. #8
    daverxp4's Avatar
    Join Date
    Aug 2005
    Location
    montreal,canada
    Posts
    1,323
    Quote Originally Posted by KsharK
    What mods are included in the Level 1 kit?
    for your rxt a power filter kit,pump wedge,top loader intake grate,solas impeller,o.p.a.s competition kit.thats the riva kit level one if thats what you asked hope this helps

    there is also a level one rotax wich are different components for the level 1.

  9. #9

    Join Date
    Jun 2006
    Location
    Lake Lanier, GA
    Posts
    12
    Quote Originally Posted by daverxp4
    for your rxt a power filter kit,pump wedge,top loader intake grate,solas impeller,o.p.a.s competition kit.thats the riva kit level one if thats what you asked hope this helps

    there is also a level one rotax wich are different components for the level 1.
    Yeah, that's the Riva parts. I was curious about this Scott's Performance kit to see what type of parts were used to reach 70+ (supercharger impeller, ic, etc?)...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. post your painted rxp pic's
    By cliff717 in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 06-23-2011, 05:28 PM
  2. post your Stock rxp gps number
    By beachboy66 in forum 4-Tec Performance
    Replies: 27
    Last Post: 08-20-2007, 02:26 PM
  3. Riva Stage II+ Numbers For anyone Interested:
    By Sirhc7897 in forum 4-Tec Performance
    Replies: 17
    Last Post: 05-30-2006, 04:17 AM
  4. How are your Riva RXP Stage II's running for you?
    By Jarrett in forum 4-Tec Performance
    Replies: 47
    Last Post: 10-26-2005, 10:36 AM
  5. Anyone tried the RXP Stage 1 Riva Impeller marked "R&qu
    By rxp_boy in forum 4-Tec Performance
    Replies: 14
    Last Post: 08-02-2005, 11:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •