Results 1 to 6 of 6

Thread: Help Please

  1. #1

    Join Date
    Jul 2007
    Location
    orlando
    Posts
    176

    Help Please

    alright here is the problem i have a sl650 with 750 motor i had the 750 motor put in last year and took it out 3 times on the new motor and then went to winterize it...i sprayed fogging spray in the carbs to kill it put in fuel stailblizer and rv antifreeze in the cooling system.....started up fine this year but it wants to die when i him the gas and doesnt idle very well i put it in the water and as soon as i hit the throttle it bogged down and died on me


    im wonderin if it might be bad fuel


  2. #2
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    it might take a while to burn off that fogging oil. Are your plugs covered with oil. Maybe clean them and try again.

  3. #3
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    If you didn't run the engine with stabil in the gas for a bit, it didn't make it into the carbs. Therefore the carb internals may be varnished up.

    You may need to open them up for a proper cleaning.

    First, try to run the old gas through it and see if it gets better.

  4. #4

    Join Date
    Jul 2007
    Location
    orlando
    Posts
    176
    alright so i took the ski out yesterday after putting new gas in it replacing the fuel filter and cleaning the carbs she ran good but before i got out of the channel the steering nozzle frew off ao i had to get towed back and now i need a new nozzle

  5. #5
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,599
    +1
    1,276
    Quote Originally Posted by pepp101 View Post
    ...before i got out of the channel the steering nozzle frew off and I had to get towed back and now i need a new nozzle
    You lost the entire nozzle?

    Did it break, or were the bolts loose?

  6. #6

    Join Date
    Jul 2007
    Location
    orlando
    Posts
    176
    yea the bottem bolt was gone along with the eye end and steering nozzle

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need HELP Please!
    By GeoRXT in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-30-2006, 08:04 AM
  2. HEy Guys Need Help PLEASE!!!
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-06-2006, 01:29 AM
  3. RXT 2005 Loose Hose - HELP PLEASE
    By BrAinZ in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-12-2006, 12:28 PM
  4. Can some one Post! A little Help Please!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2005, 07:57 PM
  5. RXP Handling !! Anyone help please
    By rxp_boy in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-17-2005, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •