Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26
  1. #1

    New Ski Break-in??

    Got the new X model I had a rxp and was told to use the white key for the first 10. but I've been told by others to just use the yellow key and have at it?????

    Please let me know your opinion??
    Thanks


  2. #2
    Banned User
    Join Date
    Jul 2006
    Location
    Ft.Lauderdale
    Posts
    3,237
    Quote Originally Posted by Hector_750 View Post
    Got the new X model I had a rxp and was told to use the white key for the first 10. but I've been told by others to just use the yellow key and have at it?????

    Please let me know your opinion??
    Thanks

    Don't use the learner key.. it's gay.. For the first couple hours vary the RPM's, then ride it like you stole it just don't hold it WOT for any long period during the first 5 hrs.

  3. #3
    Test Pilot and Racer for Hire phoenixcustoms's Avatar
    Join Date
    May 2007
    Location
    Alabama
    Posts
    1,022
    I am in this process as well. Dont use the GAY key. Keep your RPM's varied dont cruise for long periods of time at same speed or RPM. When you get to WOT do not stay there for more than 20 seconds then allow the motors RPM's to go down slowly......

    I know jerry and some others are doing it a little different.

    I think they are taking them to WOT for a bit backing them off and repeating that process.

    I will do this for 10 hours But I dont think its really a big deal. 5 to 8 might be ok and I have heard after the break in process they are supposed to wake up a little more.

  4. #4
    italianstallion314's Avatar
    Join Date
    Oct 2007
    Location
    barnegat bay
    Posts
    434
    I think your best bet is to wait till Jerry replies because I know his break-in methods have been successful. I believe he lets it idol for about 15-20 mins and then I THINK he does some 3/4 throttle runs and then goes WOT for a couple seconds and brings it down slowly and repeats the WOT process like 15 times. Not sure, hopefully he comes and replies.

  5. #5
    Test Pilot and Racer for Hire phoenixcustoms's Avatar
    Join Date
    May 2007
    Location
    Alabama
    Posts
    1,022
    I know jerry has talked about this before not shure where it is I will do a search again to see if I can find it.

  6. #6
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    809
    Guys, thank you for the material for my new signature!

  7. #7
    Test Pilot and Racer for Hire phoenixcustoms's Avatar
    Join Date
    May 2007
    Location
    Alabama
    Posts
    1,022
    This is his quote from the link at bottom. You can also read the whole thing.

    Give it a good warm up and then some short 3/4 throttle bursts every now and then for about 10 seconds each. THe rest of the time just vary the throttle. After a few hours step up to bursts of wide open throttle for 10-15 seconds each. After 5 or 6 hours ride it like you stole it

    http://greenhulk.net/forums/showthre...ight=RXP+Break

  8. #8
    Avion3333's Avatar
    Join Date
    Dec 2007
    Location
    Cayman Islands
    Posts
    686
    Quote Originally Posted by Hector_750 View Post
    Got the new X model I had a rxp and was told to use the white key for the first 10. but I've been told by others to just use the yellow key and have at it?????

    Please let me know your opinion??
    Thanks
    a guy broke in his ski with the learner key and now he cant get more that 6500rpm i really suggest the dess key

  9. #9
    Avion3333's Avatar
    Join Date
    Dec 2007
    Location
    Cayman Islands
    Posts
    686
    Quote Originally Posted by JFizzleJR View Post
    Guys, thank you for the material for my new signature!
    lol gay is a pun

  10. #10
    Test Pilot and Racer for Hire phoenixcustoms's Avatar
    Join Date
    May 2007
    Location
    Alabama
    Posts
    1,022
    Quote Originally Posted by JFizzleJR View Post
    Guys, thank you for the material for my new signature!

    Well the key isnt gay for some people who cant handle it.

    But for the most part I Paid 13K and got an extra key that limits the motor to 5K so thats GAY......../........

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Finished New Ski Break-in
    By FlaJim in forum Kawasaki Open Discussion
    Replies: 9
    Last Post: 02-10-2014, 03:32 PM
  2. New Charger Break In???
    By JonnyRXT in forum 4-Tec Performance
    Replies: 6
    Last Post: 03-14-2009, 01:48 PM
  3. New engine break in fuel/oil ratio
    By havanabama in forum Yamaha Open Discussion
    Replies: 6
    Last Post: 02-25-2008, 02:33 PM
  4. new engine break-in advise...do u agree?
    By scottyj in forum 4-Tec Performance
    Replies: 38
    Last Post: 10-16-2007, 05:50 PM
  5. New Rxp break-in procedure
    By SUPERBEAST in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 05-09-2005, 05:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •