Results 1 to 5 of 5
  1. #1

    Join Date
    Oct 2006
    Location
    Aberdeen,Md
    Posts
    257

    Wedge installed , but have a ?

    The steering cable extention they give you is too long to line up the steering, and I'm worried about not having enough on the stock connection. I have about 3/4's of an inch of threads. Is there another adjustment for the steering?
    Thanks Dan


  2. #2
    jpeconsult's Avatar
    Join Date
    Jul 2007
    Location
    Pineville, LA
    Posts
    5,448
    +1
    1
    Check this out. I also installed the wedge and had the same problem. This will help a lot!

    http://greenhulk.net/forums/showthread.php?t=807

    PS --who's the model?

  3. #3

    Join Date
    Oct 2006
    Location
    Aberdeen,Md
    Posts
    257
    Ok I did this, I got the cable to go out. Now I need to come back some and I can't get it to move.The cable just twists and spins back. Help

  4. #4

    Join Date
    Oct 2006
    Location
    Aberdeen,Md
    Posts
    257
    Still can't get this adjusted

  5. #5
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    You are going to have to unhook the cable from the steering assembly. It is kind of a pain. You can either pull the steering assy out and unhook it or you can leave it in the ski and unhook it. You need to remove the U clamp and then remove the bolt that is holding the cable to the steering. Once removed you can adjust the cable with the threaded adjuster on the end. Dont drop the bolt. I would pull the steering assy to do it. Hope this helps.
    Jim

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 8
    Last Post: 01-12-2014, 10:23 PM
  2. Steering alignment after wedge install
    By excess in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-18-2006, 04:46 PM
  3. Wedge install...
    By Alaska05RXT in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 04-23-2006, 11:48 PM
  4. Wrong Wedge Install ?
    By Kinchyle in forum 4-Tec Performance
    Replies: 7
    Last Post: 07-13-2005, 05:41 PM
  5. Wedge installed and lost 50 rpm
    By Kinchyle in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-01-2005, 08:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •