Results 1 to 6 of 6
  1. #1

    Join Date
    May 2008
    Location
    USA - CANADA
    Posts
    179

    1.00mm oversize piston with oem head ??

    can a oversized piston/cylinder be used with stock dome head ??

    thanks...


  2. #2
    TimAtkinson's Avatar
    Join Date
    Apr 2008
    Location
    Hillsboro Ohio
    Posts
    156
    Yes just make sure both domes are the same part number.

  3. #3
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    1mm is pretty big, you may want to have the heads cut for the added size. Squish and compression will affected.

  4. #4

    Join Date
    May 2008
    Location
    USA - CANADA
    Posts
    179
    will see what the shop says aswell,
    thank you

  5. #5

    Join Date
    May 2008
    Location
    USA - CANADA
    Posts
    179
    Quote Originally Posted by TimAtkinson View Post
    Yes just make sure both domes are the same part number.

    what if they are not the same part number ??

    for example one has 50 in the end and another one has 25

  6. #6
    xplayer2885's Avatar
    Join Date
    Sep 2006
    Location
    LI, NY
    Posts
    1,251
    +1
    43
    Quote Originally Posted by klze View Post
    what if they are not the same part number ??

    for example one has 50 in the end and another one has 25
    IMO i would find a used cylinder. I was able to pick one up on the hulk earlier this week. Should be seeing that bad boy soon!
    Best part was it was 31 bucks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts 100.00mm CP Pistons with new ring packs
    By TJBrad04 in forum Sea Doo Classifieds
    Replies: 9
    Last Post: 01-25-2017, 12:32 PM
  2. Need jetting specs for unported 1300 with OEM head, carbs and CDI
    By philip_gpr in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 07-05-2008, 04:19 PM
  3. Machined OEM head - what squish do you end up with?
    By philip_gpr in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 01-23-2008, 11:51 PM
  4. Heads Up Jerry! Problem with OEM Parts Microfiche
    By joeg in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 07-22-2007, 08:34 PM
  5. Mixing OEM sized pistons with oversized pistons
    By vanlohd in forum Polaris Open Discussion
    Replies: 10
    Last Post: 05-20-2007, 10:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •