Results 1 to 5 of 5
  1. #1
    fabrication guru rapidacceleration's Avatar
    Join Date
    May 2005
    Location
    Lake Travis austin, TX
    Posts
    1,156
    +1
    2

    will a RXP pump fit in a XPL pump shoe????

    will a RXP pump fit in a XPL pump shoe????

    Some of you guys talked about useing the magnum xpl pumps in your RXP's.

    But could I put a RXP pump in my XPl pump shoe????

    the 4tec XPl suffer a major scat pump failure so im looking for some other options.


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,062
    +1
    790
    Daniel, I believe it will.
    I will be at the lake all weekend if you want to test fit mine, But
    I remember someone doing it and just used the gtx wear ring.

    .

  3. #3
    GTXX's Avatar
    Join Date
    Jan 2006
    Location
    NW, GA
    Posts
    1,776
    I'm almost certain that they will. I know a guy that was modifying 951 props to fit the SC GTX pumps, not an RXP pump, and using them in XPL and GSX, the threads on the pump shaft are the same and the prop diameter is the same but the 951 prop hits the pump body when tightened down all the way. Jim Budnik is the guy doing the pumps and may be able to set you up with one ready to go and use the XPL driveshafts if that's what you're needing, PM username Jim on snkypete's.

  4. #4
    fabrication guru rapidacceleration's Avatar
    Join Date
    May 2005
    Location
    Lake Travis austin, TX
    Posts
    1,156
    +1
    2
    if the RXP (159.8mm) pump will fit into my xpl shoe and spin freely then im going to spin down a rxp driveshaft to fit the rest of my 2 peice driveshaft setup.

    time to push some serious water volume threw this monster so I can break into the low 80's
    the previous scat d-75 12 vein (148mm) was allwas the week point & i felt the key thing holding me back.

  5. #5
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    Quote Originally Posted by rapidacceleration

    time to push some serious water volume threw this monster so I can break into the low 80's

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Will a 05 cluster fit in a 07 hood?
    By HardmanGT in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-26-2012, 09:29 PM
  2. Will a 08 pump shoe fit 06 ski???
    By Snoman in forum 4-Tec Performance
    Replies: 6
    Last Post: 10-11-2011, 10:11 AM
  3. Will a 1200DI motor fit in a Virage I hull?
    By viragetxi2002 in forum Polaris Open Discussion
    Replies: 16
    Last Post: 02-09-2009, 03:43 PM
  4. Will a RXP ECU work in a 04 GTX-SC?
    By OsideBill in forum 4-Tec Performance
    Replies: 3
    Last Post: 03-29-2007, 04:25 PM
  5. Will a rxp impeller fit a rxt ?
    By Kinchyle in forum 4-Tec Performance
    Replies: 12
    Last Post: 07-13-2005, 12:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •