Results 1 to 7 of 7
  1. #1

    what size is a stock carb on a gp1200

    I have three extra carbs off a recent project and am thinking about putting on on my modded 550 to replace the stock round body


  2. #2
    DAGO RACING CREW 97GPSLEEPER's Avatar
    Join Date
    Apr 2006
    Location
    Orange, TX
    Posts
    4,228
    +1
    169
    44mm SBN

  3. #3
    You wouldnt know what size jets are in a stock carb would you... I found out my 550 carb is a bn 44 round body but I would still like to put this sbn on it

  4. #4
    DAGO RACING CREW 97GPSLEEPER's Avatar
    Join Date
    Apr 2006
    Location
    Orange, TX
    Posts
    4,228
    +1
    169
    I don't remember what size the stock jets are, others in this section will chime in on this for you.
    Last edited by 97GPSLEEPER; 06-18-2008 at 10:16 AM.

  5. #5
    Looks like the main is 135....anyone know the other one?

    Lookin for high and low and needle and seat size...
    Last edited by chritopherlloyd; 06-18-2008 at 10:32 AM.

  6. #6
    quadzilla's Avatar
    Join Date
    Apr 2007
    Location
    LOCH NESS Monster-Land
    Posts
    1,178
    +1
    29

    Lightbulb ?

    Quote Originally Posted by chritopherlloyd View Post
    Looks like the main is 135....anyone know the other one?

    Lookin for high and low and needle and seat size...

    Hey there Chrit..

    carb #1, Main jet is 135, pilot jet is 100
    carb #2, Main jet is 135, pilot jet is 95
    carb #3, Main jet is 135, pilot jet is 97.5

    Needle and seat is 1.2,

    Gerry

  7. #7
    thanks thats awesome, gives me some choices with the different possible setups

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what size is gas tank filler hose on 09 fx sho
    By pjcole in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 06-01-2014, 10:03 PM
  2. What is the stock prop on a 1997 GSX 787cc?
    By macdoo in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 06-03-2012, 07:39 PM
  3. What size is the nut on the end of the impeller shaft?
    By o uncola o in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-07-2009, 10:23 AM
  4. what size is restrictor on return
    By desertmariner in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 02-21-2009, 09:49 PM
  5. what size is the reduction nozzle?
    By Chezzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 12-21-2006, 10:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •