Some of you know that I sucked up enough grass/shells and crap to fill a garbage can! in my last ride out with Dr Len. So I was really concerned about the condition of the prop and stainless wear ring.
At first when I removed the pump (time to change the oil) the wear ring was rusty where it had been scratched up pretty good. So I took some wet/dry 320 grit paper and with Bomb oil polished it up, looks new again and no deep marks at all, I`m impressed...
Second, when I went to remove the nose cone, there wasn`t any extra sealant just the O-rings in the pump, Billet tail cone came right off and the oil looked really good. Maybe just a hint of little metal particles, the oil was clear, not muddy, and appeared to be green and def smelled like a gear lube... There was no Water in the oil at all! Again impressed!

to the skat mod! and the prop still looks great too!...PR...