Thread: metal washers with BOV
07-09-2006, 09:36 PM #1
metal washers with BOV
Anyone out there tried this combo yet? Would the BOV reduce heat on the washers giving more hours of life or shim time? I understand on the ceramics but with metal we are dealing with different heat characteristics and wear rates from friction.
07-09-2006, 09:40 PM #2Originally Posted by HOSS
Yep,,What he said
07-09-2006, 10:46 PM #3
I have the B.O.V. with steel on my stage III and steel with no B.O.V. on my other one, both 04-05 shaft. Can really hear the B.O.V. all else seams the same.
07-09-2006, 11:49 PM #4
07-10-2006, 07:59 AM #5Originally Posted by TennesseeRXP
sorry for getting off topic hoss
07-10-2006, 09:52 AM #6
- Join Date
- May 2006
Im running the steel washers with a BOV and vortec sc impeller. So far so good. Pulls 8050-8100 even in the heat.
But I only have 5 hrs on the washers, so too seeon to tell. (but the ceramics failed after 2 hrs)
07-10-2006, 10:07 AM #7Originally Posted by excess
07-10-2006, 04:33 PM #8
So is a BOV something that should be done with the metal washers or does it not matter ?
Wasn't someone going to test with thermal paint.
If someone had thermal paint and a BOV they could do a with and without paint test.
07-10-2006, 06:19 PM #9
- Join Date
- Jul 2006
- Hays, Kansas
What does BOV stand for? Thanks.
07-10-2006, 06:32 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Shibby1485 in forum Sea Doo How To & FAQsReplies: 226Last Post: 06-01-2015, 03:25 PM
By rapidacceleration in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-08-2008, 09:33 AM
By vxrpete8 in forum Sea Doo ClassifiedsReplies: 12Last Post: 07-05-2008, 04:07 PM
By jamiej in forum 4-Tec PerformanceReplies: 11Last Post: 10-18-2007, 01:22 PM
By Jarrett in forum 4-Tec PerformanceReplies: 22Last Post: 09-09-2006, 05:55 PM