Results 1 to 7 of 7
  1. #1

    Need Help With 951 Engine

    I'm putting a piston kit in a 951 engine that I bought taken apart. Where do the orings go that are on the cylinder/head studs?


  2. #2

    Join Date
    Apr 2006
    panama city beach 'fl


    there are o rings on the studs,not sure if for vibration or water seal

    later cd

  3. #3
    where do they go? by the base or head gasket?

  4. #4
    JayZ's Avatar
    Join Date
    Feb 2006
    mississauga, ontario
    have a look at the manual. it will tell you everything you need to know.....

    happy reading.

  5. #5
    race24x's Avatar
    Join Date
    May 2007
    Fayette, Maine
    Turbo I had the same questions when rebuilding. I called the SeaDoo place they said put the cylinder on and then put the Orings under the head gasket. Push them slightly into the cylinder so they are flush with the top. If I am wrong someone please post, but thats what they told me and thats what I did

  6. #6
    Dirty Sanchez's Avatar
    Join Date
    Dec 2005
    Northern Virginia
    that sounds correct- o-rings under head gasket

  7. #7

    Join Date
    May 2008
    Braidwood, IL
    I just pulled a 951 motor apart, and the o-rings where under the cylinder. The engine only had 40 hours on it, so im sure no one had there hands in it yet, even thought the dummies who owned it before me forgot to put the drain plugs in and submerged it, and then tried just firing it up when they pulled it out of the water and busted the crank.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need help with blown engine
    By mtb275 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-08-2012, 02:13 PM
  2. HELP: Need help with 650 engine
    By tenjuna in forum Polaris Open Discussion
    Replies: 0
    Last Post: 05-05-2010, 09:51 AM
  3. need help with 951 DI engine
    By mr_magookw in forum 2-Stroke Performance
    Replies: 0
    Last Post: 05-03-2009, 11:57 AM
  4. Need help with 2001 GTX 951 injected
    By turbocycle in forum 2-Stroke Performance
    Replies: 1
    Last Post: 07-06-2008, 02:03 PM
  5. 99 stx 900 Need help with engine!!! HELP!!!!
    By gvnitup in forum Kawasaki Open Discussion
    Replies: 4
    Last Post: 07-11-2007, 04:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts