Thread: 1996 Polaris sltx 1050
07-02-2008, 06:13 PM #1
- Join Date
- Aug 2007
- London Ontario
1996 Polaris sltx 1050
I Got a problem ,can any one help.I have a totally rebuilt stock 1050 engine.oem parts.Im running it with a hotseat alum water box.When i ease up on the throttle from idle to plane.The engine bogs from 2400-3500RPM.If i fludder the throttle I get through the bog and reach 56mph/6750rpm.If i hammer it from start it boots right to 56mph no bog..if i slow down gradually it bogs at 2400-3500rpm.When it bogs if i do not fludder the throttle it will slow right down and stall out..Any Imput would be Great..I do not have a stock waterbox,i would be interested to buy one...firstname.lastname@example.org. Im running high oct fuel,polaris mix oil,correct fuel/oil mix,proper plugs.. Thax Guys
07-02-2008, 08:44 PM #2
I believe there was a bulletin by Polaris that addresses this issue in which they suggest changing the mid jet in the carbs. Look under the Tech section for this as I believe ph2ocraft (Al) posted this bulletin.
07-02-2008, 08:47 PM #3
Here is the post:
Need to get the service bulletin that the post references to see what it tells you to do.
Last edited by 32DegH2O; 07-02-2008 at 08:50 PM.
07-02-2008, 10:07 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jasonmd13 in forum Polaris Open DiscussionReplies: 30Last Post: 04-20-2013, 01:10 PM
By jasonmd13 in forum Polaris Open DiscussionReplies: 2Last Post: 04-14-2013, 08:54 PM
By an32088 in forum Polaris Open DiscussionReplies: 16Last Post: 06-15-2012, 02:31 AM
By gvnitup in forum Polaris Open DiscussionReplies: 2Last Post: 06-25-2010, 09:52 AM
By John0227 in forum Polaris Open DiscussionReplies: 1Last Post: 06-09-2010, 02:39 PM