Thread: FX140 taking on water...
07-06-2008, 03:55 PM #1
FX140 taking on water...
My neighbors fx140 is taking on water after it sits over night, I checked the hull over and it's solid... the pump shaft cover is tight... I was thinking it might be the ride plate/intake grate leaking somewhere...
Anyone heard of this?
07-07-2008, 10:27 PM #2
Bump... come on any one... ??????
07-08-2008, 02:22 AM #3
you need to take it out of the water and see where it comes back out from
07-08-2008, 11:32 AM #4
Well i know you probably have but check the plugs. Mine sunk it is fine but I have changed my plugs and it's not taken on water since.
07-09-2008, 10:02 AM #5
Put it in the water when bone dry sitting and not running and see if you can see where it is leaking on the inside with the seat off. Or when on the trailer use a hose and put a few inches of water in the bottom of the hull while not running and see where it leaks out at, shouldn't be an issue to do this. Both might show if it is a leak from a small location that isn't visible to the naked eye.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Speed200 in forum 4-Tec PerformanceReplies: 1Last Post: 06-09-2007, 10:32 PM
By jeff joiner in forum Polaris How To & FAQsReplies: 6Last Post: 05-09-2007, 08:58 PM
By JCHOUCK in forum Sea Doo Open DiscussionReplies: 1Last Post: 08-14-2006, 10:20 AM
By CarFanatic in forum Sea Doo Open DiscussionReplies: 3Last Post: 05-30-2006, 08:09 AM
By RXPDAVID in forum 4-Tec PerformanceReplies: 10Last Post: 05-10-2005, 06:44 AM