Results 1 to 5 of 5
  1. #1

    My 2000 Polaris Genesis has no MFI display

    My 2000 Genesis has no MFI display.
    Was using a battery charger on a 5 amp setting when it stopped working.
    What I have done.
    Checked fuses.
    Checked and I do have power on both sides of the two fuses.
    Un-plugged and reconnected all pin-type connections going to MFI.
    Took off all grounds and cleaned them.
    The bilge pump does work.
    What else should I look for ??
    Thanks again in advance.


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Check the red/purple going to the back of the MFD, does it have battery voltage?
    If not, double check the spade connector at the fuse end and once again verify the fuse is good.
    Do you have battery voltage before the MFD fuse?
    5amps is WAY to much current, try .5-2 amps max.

  3. #3
    Quote Originally Posted by ph2ocraft View Post
    Check the red/purple going to the back of the MFD, does it have battery voltage?
    If not, double check the spade connector at the fuse end and once again verify the fuse is good.
    Do you have battery voltage before the MFD fuse?
    5amps is WAY to much current, try .5-2 amps max.
    Thank's.
    Will do.

  4. #4
    Quote Originally Posted by ph2ocraft View Post
    Check the red/purple going to the back of the MFD, does it have battery voltage?
    If not, double check the spade connector at the fuse end and once again verify the fuse is good.
    Do you have battery voltage before the MFD fuse?
    5amps is WAY to much current, try .5-2 amps max.
    Where the small 3 amp fuse is there is no voltage when I check the connections that hold the fuse in place.
    The fuse is good.
    I have checked three of the red/purple wires and they all have 12.5 volts.

  5. #5
    SPEED KILLS, BUT YOU GET THERE QUICKER Keddano's Avatar
    Join Date
    Jul 2007
    Location
    Cedar Rapids,Iowa
    Posts
    6,381
    +1
    23
    is there votage with the bilge turned on? Also his reverse motor isn't working.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Just Bought 2000 Polaris Genesis has no spark!
    By tmbrown28 in forum Polaris Tech Tips and Info
    Replies: 15
    Last Post: 08-12-2014, 08:55 PM
  2. Needs help with my 2000 Polaris Genesis 1200 fuel injected
    By mchubbs in forum Polaris Open Discussion
    Replies: 16
    Last Post: 08-12-2014, 08:42 AM
  3. WTB - Parts Polaris Genesis or Virage MFI display pieces
    By K447 in forum Polaris Classifieds
    Replies: 4
    Last Post: 11-26-2013, 10:30 PM
  4. Replies: 5
    Last Post: 08-07-2012, 12:14 PM
  5. 2000 Polaris Genesis FFI-No Spark HELP
    By Rogaty17 in forum Polaris How To & FAQs
    Replies: 8
    Last Post: 06-13-2008, 09:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •