Thread: Question about reduction nozzle
07-14-2008, 06:45 PM #1
Question about reduction nozzle
I recently bought my RXT and noticed that the prior owner had installed a reduction nozzel. He left the 83mm ring installed. Where can i get the remainder of the rings. Also with a 83mm, do i get a faster top speed??
07-14-2008, 07:13 PM #2
You can get the rings from Skat Trak or maybe Riva. In my testing I had a better holeshot with the 83mm ring and higher speed with the 80-81 rings on a RXP.
07-14-2008, 07:28 PM #3
you can buy them from riva here is the part number. prnyring82 or just change the last number for ring size. ask for billy or tony they can help ya out.
07-14-2008, 07:37 PM #4
What size do you think I should get for a higher top speed?
07-14-2008, 07:54 PM #5
83 is stock noz size you have to go smaller but with the heat now you will lose rpms and go slower. is the ski stock. and it is a rxt correct also have the ceramic s/c washers been changed ?
07-14-2008, 08:01 PM #6
07-14-2008, 08:20 PM #7
07-14-2008, 08:25 PM #8
07-14-2008, 11:01 PM #9
- Join Date
- Apr 2005
WHAT RPMS ARE YOU RUNNING NOW TODD
07-15-2008, 08:48 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By MSCARD02 in forum 2-Stroke PerformanceReplies: 3Last Post: 04-08-2010, 11:34 AM
By sfackett0 in forum 4-Tec PerformanceReplies: 1Last Post: 08-15-2009, 09:44 AM
By speedskixp in forum 4-Tec PerformanceReplies: 0Last Post: 06-13-2008, 05:14 PM
By jcorallo in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 07-20-2007, 03:37 PM
By NeverEndn in forum 4-Tec PerformanceReplies: 5Last Post: 08-13-2006, 09:20 PM