Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1
    junior's Avatar
    Join Date
    Jul 2007
    Location
    Bennett, CO
    Posts
    58

    05 GTX Water in Oil

    Some water got in the oil while filling on the lake, could not of been a lot but the oil is milky, I drained the oil with fresh new oil and put in a new filter, started the ski and the oil got milky again.

    Is there a trick or secrets to getting rid of the oil?

    Any suggestions would be great.

    Thanks

    Mike


  2. #2
    GROOVY MAFIOSO's Avatar
    Join Date
    Apr 2008
    Location
    TAMPA,FL
    Posts
    85
    thats what I'm doing now... If it was a lot of wtaer you might need to drain the Intake. if not a lot of water keep changing the oil. but doa boil poit procedure first...

  3. #3
    junior's Avatar
    Join Date
    Jul 2007
    Location
    Bennett, CO
    Posts
    58
    Whats doa boil point procedure?

    How many times does it usually take to flush the oil till its clear again?

    The plugs were dry so it not in the engine

    Mike

  4. #4
    GROOVY MAFIOSO's Avatar
    Join Date
    Apr 2008
    Location
    TAMPA,FL
    Posts
    85
    get it started and keep it on the trailer backed into the water. so the ride plate(radiator) is in the water and let run to get hot and burn out the moisture in the engine. then chek the oil. change it and keep doing it untill its clear. then put the good oil in.should be good to go. If you get a lot of water in then you will have to take off the Intake to dump out the water. Thats what i had to do. still have not gotten it started yet.

  5. #5
    junior's Avatar
    Join Date
    Jul 2007
    Location
    Bennett, CO
    Posts
    58
    Quote Originally Posted by GROOVY MAFIOSO View Post
    get it started and keep it on the trailer backed into the water. so the ride plate(radiator) is in the water and let run to get hot and burn out the moisture in the engine. then chek the oil. change it and keep doing it untill its clear. then put the good oil in.should be good to go. If you get a lot of water in then you will have to take off the Intake to dump out the water. Thats what i had to do. still have not gotten it started yet.

    Cant ya just ride it at 3500 RPM for 10 min?

    Do I need to pinch the oil cooling line?

    thx

    This ski starts real easy...

    Hope yours does as well...

  6. #6
    ADSR's Avatar
    Join Date
    Jul 2008
    Location
    Canadian West Coast
    Posts
    669
    +1
    2
    You sure it's not the head gasket? I had one leave me a nasty oil milkshake before.

  7. #7
    junior's Avatar
    Join Date
    Jul 2007
    Location
    Bennett, CO
    Posts
    58
    Quote Originally Posted by ADSR View Post
    You sure it's not the head gasket? I had one leave me a nasty oil milkshake before.

    Everythings possible but my friend put a quart of oil in the ski and some water splashed into the hull, then he noticed the oil milkshake mixture and stopped riding it.

    we did 2 changes so far and still milky

  8. #8
    King_Of_Fun's Avatar
    Join Date
    Jul 2007
    Location
    Catawba Island, Ohio
    Posts
    2,703
    Quote Originally Posted by junior View Post
    Everythings possible but my friend put a quart of oil in the ski and some water splashed into the hull, then he noticed the oil milkshake mixture and stopped riding it.

    we did 2 changes so far and still milky
    If water splashed into the hull, a few drops could have splashed into the oil filler tube, but that wouldn't turn the oil milky. He didn't happen to roll the ski with the dipstick out did he?... Ron

  9. #9
    jpeconsult's Avatar
    Join Date
    Jul 2007
    Location
    Pineville, LA
    Posts
    5,448
    +1
    1
    I think there is more to the story. There is a factor not being revealed, or considered.

  10. #10
    Vern's Avatar
    Join Date
    May 2005
    Location
    Grand Haven, MI
    Posts
    3,594
    +1
    128
    Absolutely ... no way to splash enough water into the oil fill tube to get the oil that milky ... it was rolled and sucked in water, or head gasket is bad (how is the coolant level?) or something ...

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2004 Sea Doo GTX Supercharged - Water in Oil
    By Bjohnson040 in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 05-20-2013, 01:19 PM
  2. 05 r12x water in oil
    By caliburn in forum Honda Open Discussion
    Replies: 24
    Last Post: 04-05-2013, 06:38 PM
  3. GTX 155hp - water in oil
    By coastalfun in forum 4-Tec Performance
    Replies: 15
    Last Post: 02-05-2013, 06:09 PM
  4. 96 GTX - Water in the oil!
    By skiversinc in forum 2-Stroke Performance
    Replies: 5
    Last Post: 10-13-2008, 07:08 AM
  5. 96 GTX - Water in the oil!
    By skiversinc in forum 2-Stroke Performance
    Replies: 0
    Last Post: 10-08-2008, 04:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •