Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 53
  1. #1
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711

    free left overs from my 1300cc conversion- yes your read correctly free!!!!

    it appears as though someone on here (aruba) was generous enough to give me a set of unwanted tripple pipes for free, this has really touched me and made me realise just how lucky i am to be a member of this wonderful board.

    because of this generous act today from Aruba to me i am going to follow his and many others selfless acts on here by offering some of the parts i have stored in the garage to new owners at no cost.

    Shipping however will be the recievers responsibility, sorry

    OK now i am starting this list from memory until i go down to the garage and make a complete list ( as my garage sale thread seems to have been deleted...woody the sheep addon was NFS! end of story).

    Note: most of these parts have come off my 2002 GPR which is aussie spec,


    First up for offer is


    1 x used wear ring with slight thrashed but still usable

    1 x steering assay with handle bar bracket and bolts

    1 x stock handle bars

    1 x choke assembly lever etc..

    1 x oil pump, it was working fine when pulled off but due to me putting novi's on i went premix.

    1 x stock ride plate from a 2002 gpr

    1 x stock grate from the 02 ski

    1 x stock handle bar rubber thing

    1 x after market bars - BACK UP FOR GRABS AS GPR RIDER HAS NOT REPLIED TO MY PM'S


    1 x stock carb cover thing with mesh grill and 5 of the 6 bolts that go with it.

    1 x stock 2002 spec pump with shaft and prop ( this needs new bearing in the pump as they are a bit rusted due to a seal failure but this can be fixed pretty easy) --going to kham383 in QLD - To Be Shipped ASAP

    1 x servo motor - SHIPPED TO AUGREMY- total shipping cost to the USA $26.00aud




    there will be more to come and to keep things fair i will limit my give away to one item per person , i am doing this to share so one person does not take all the good stuff and leave the rest....

    now guys this did all (mostly) come off a 2002 gpr with 130 hours salt use on it but everything is working, the pump def needs new bearings as you can see but they are pretty cheap if you go direct to nachi or soemthing.

    just call dibbz on what you want and i wll arrange shipping with you using australia post to keep costs down.

    there are two items listed they may already be spoken for so keep that in mind when asking for something.

    just post your requests here and we can go from there.
    Last edited by izz0; 08-15-2008 at 06:12 PM. Reason: Updated more parts-- more to come


  2. #2
    Caution raider fan in the area !!
    Join Date
    Jul 2006
    Location
    Sacramento, California, United States
    Posts
    1,834
    +1
    2
    wear ring dibs ,pending pics .

  3. #3
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    i will get pics in a bit ....it sounds like you dont want the steering assay now either, is that correct?


    ok my camera is flat so its on charge now, give it 30 minutes and she will be good to go.
    Last edited by izz0; 07-17-2008 at 05:58 AM.

  4. #4
    Caution raider fan in the area !!
    Join Date
    Jul 2006
    Location
    Sacramento, California, United States
    Posts
    1,834
    +1
    2
    whats it cost to ship them?

  5. #5
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    no idea, but i am going to use good old australia post so the shipping costs will be kept nice and low.

    if you want more information about australian postage rates you can check here

    http://www1.auspost.com.au/pac/int_parcel.asp

    that will give you a much better idea.

    it says its about 60 dollars AUD to ship up to 20KG to the US 3-7 day shipping which seems pretty good to me but please check the aussie post site for more accurate details along with terms and conditions ( mofos wont let us ship alcohol by post of courier for example and yes our beer leaves yours for dead :P)
    Last edited by izz0; 07-17-2008 at 06:32 AM.

  6. #6
    billy's gpr's Avatar
    Join Date
    Mar 2007
    Location
    central coast...nsw...australia
    Posts
    295
    +1
    1

    02 pump

    thanks anyway but,it will no good to be as 2002 run different lenght drive shaft,just orderd parts from gerry to fix it,thanks bill

  7. #7
    billy's gpr's Avatar
    Join Date
    Mar 2007
    Location
    central coast...nsw...australia
    Posts
    295
    +1
    1
    ( mofos wont let us ship alcohol by post of courier for example and yes our beer leaves yours for dead :P)[/quote]
    +1

  8. #8
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711

    pics!!

    here are the first round of pics....

    the pump , shaft and prop are usabel but it needs new bearings so keep that in mind if yuou want it....maybe someone wants to do a seadoo pump conversion on the gprxp or something with it....i think the old shafts are been r&d'd for that ...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	SANY0074.JPG 
Views:	33 
Size:	557.5 KB 
ID:	83476   Click image for larger version. 

Name:	SANY0075.JPG 
Views:	31 
Size:	530.7 KB 
ID:	83477   Click image for larger version. 

Name:	SANY0076.JPG 
Views:	26 
Size:	536.0 KB 
ID:	83478   Click image for larger version. 

Name:	SANY0077.JPG 
Views:	33 
Size:	525.7 KB 
ID:	83479   Click image for larger version. 

Name:	SANY0078.JPG 
Views:	28 
Size:	517.5 KB 
ID:	83480   Click image for larger version. 

Name:	SANY0079.JPG 
Views:	38 
Size:	622.4 KB 
ID:	83481  

    Click image for larger version. 

Name:	SANY0080.JPG 
Views:	34 
Size:	464.9 KB 
ID:	83482   Click image for larger version. 

Name:	SANY0081.JPG 
Views:	34 
Size:	609.6 KB 
ID:	83483  
    Last edited by izz0; 07-17-2008 at 07:55 AM.

  9. #9
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711

    more

    pics!!

    that oil pump although udsed in salt for its 130 hour life does work and was not removed due to oil issues, i went premix because well i was forced to by someone i know.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	SANY0082.JPG 
Views:	32 
Size:	503.2 KB 
ID:	83484   Click image for larger version. 

Name:	SANY0084.JPG 
Views:	28 
Size:	595.5 KB 
ID:	83485   Click image for larger version. 

Name:	SANY0085.JPG 
Views:	27 
Size:	521.0 KB 
ID:	83486   Click image for larger version. 

Name:	SANY0086.JPG 
Views:	25 
Size:	537.9 KB 
ID:	83487   Click image for larger version. 

Name:	SANY0087.JPG 
Views:	31 
Size:	598.2 KB 
ID:	83489   Click image for larger version. 

Name:	SANY0088.JPG 
Views:	49 
Size:	644.1 KB 
ID:	83490  

    Click image for larger version. 

Name:	SANY0096.JPG 
Views:	30 
Size:	563.8 KB 
ID:	83491  

  10. #10
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23

Page 1 of 6 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts My Left-overs: Polaris 2-Stroke PWCs (Pics Attached)
    By hkg3k in forum Polaris Classifieds
    Replies: 8
    Last Post: 03-20-2014, 05:07 PM
  2. FS - Parts More of My Left-overs: Polaris 2-Stroke PWCs (Pics Attached)
    By hkg3k in forum Polaris Classifieds
    Replies: 3
    Last Post: 09-12-2013, 11:47 AM
  3. Found some parts in the garage left over from my 00 SLX
    By Sirhc7897 in forum Polaris Classifieds
    Replies: 15
    Last Post: 09-22-2009, 10:51 AM
  4. Just GPS'd my 06 RXP, ye ha!!!
    By NeverEndn in forum 4-Tec Performance
    Replies: 18
    Last Post: 07-21-2006, 10:52 PM
  5. Updat on my BAD luck..YES
    By Water4fire in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 02-23-2006, 11:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •