Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    Exclamation Need to make my 06 GPR faster

    Hi im new to the site im interested in making my ski faster so far I have just the plain old Riva Stage I kit on the ski and wanted to know what i can do to get more top end speed on my ski...Also lookin to keep it within a budget dont want to spend tooo much...........

    Another thing i want to do is get my scratches removed and fix the gouges in the body please help what do i do?


  2. #2

  3. #3
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    how much money are you looking to spend?

    Can you specify exactly what parts you have on your ski?

  4. #4
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    he sent me a PM he has the all riva stage 1

    I would first off..

    reinforce your tunnel

    and install

    Waveeater Clips/Couplers

    These are just save your ski type things.. reinforce your tunnel needs to be done with any mods

    waveeater clips/couplers helps prevent your powervalves from dropping..

    -----------------------------------------------------------------------

    I would send your Riva plate out to Jims performance to get your plate modded.

    I would also at the same time send your trim tabs to Jim to get cut/trued... so that they are the same length as stock. This is assuming that yours are longer than OEM (they stick out past the hull)

    Then you can move into things like

    VF3 Reeds
    High Comp. Head (can be done by jim)

    depends really how much you want to spend and how fast you want to go. You can also take out your cylinders and pistons.. send your cylinders out to Ben herman or Lowell horning and get your cylinders big bored to like a GP1390R and get new pistons.. High Compression head and some other things and you ski will be low to mid 80's depending on how good you are at tuning.

    other people should chime in, hope I covered everything?

  5. #5
    NIXON'S BACK!! cincygpr's Avatar
    Join Date
    Jul 2007
    Location
    Birmingham, MI
    Posts
    545
    Quote Originally Posted by HallPass View Post
    he sent me a PM he has the all riva stage 1

    I would first off..

    reinforce your tunnel

    and install

    Waveeater Clips/Couplers

    These are just save your ski type things.. reinforce your tunnel needs to be done with any mods

    waveeater clips/couplers helps prevent your powervalves from dropping..

    -----------------------------------------------------------------------

    I would send your Riva plate out to Jims performance to get your plate modded.

    I would also at the same time send your trim tabs to Jim to get cut/trued... so that they are the same length as stock. This is assuming that yours are longer than OEM (they stick out past the hull)

    Then you can move into things like

    VF3 Reeds
    High Comp. Head (can be done by jim)

    depends really how much you want to spend and how fast you want to go. You can also take out your cylinders and pistons.. send your cylinders out to Ben herman or Lowell horning and get your cylinders big bored to like a GP1390R and get new pistons.. High Compression head and some other things and you ski will be low to mid 80's depending on how good you are at tuning.

    other people should chime in, hope I covered everything?
    A carb rejet is definately needed if you do these mods though!

    Just wanted to chime in on that

  6. #6

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Quote Originally Posted by cincygpr View Post
    A carb rejet is definately needed if you do these mods though!

    Just wanted to chime in on that

    Isnt this a 2006 GP1300R?

  7. #7
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41
    Quote Originally Posted by jcorallo View Post
    Isnt this a 2006 GP1300R?
    YEP NO POWER VALVES

  8. #8
    ecpChris's Avatar
    Join Date
    Jul 2007
    Location
    ocean county nj
    Posts
    2,912
    +1
    427
    +1 and no carbs

  9. #9
    NIXON'S BACK!! cincygpr's Avatar
    Join Date
    Jul 2007
    Location
    Birmingham, MI
    Posts
    545
    Reading > me.

    EFI controller then for the '06 then...

  10. #10
    GPryan's Avatar
    Join Date
    Apr 2007
    Location
    Prairieville, LA
    Posts
    1,052
    +1
    25
    Quote Originally Posted by N8R View Post
    YEP NO POWER VALVES
    or carbs

    and he as an EFI controller says so in the other post.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to make my 03 GTX faster?
    By rafelos1337 in forum 4-Tec Performance
    Replies: 31
    Last Post: 05-30-2012, 10:44 AM
  2. planning to make my gpr race skii..
    By andy95'slx780 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 11-11-2011, 07:23 PM
  3. Replies: 2
    Last Post: 08-06-2008, 08:04 AM
  4. how to make my 900 stx faster??
    By supremebeing74 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-05-2008, 09:59 AM
  5. Replies: 0
    Last Post: 06-28-2008, 09:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •