07-18-2008, 11:42 AM #1
- Join Date
- Apr 2008
2000 virage tx mfd remains on always
JUST A QUICK QUESTION. DOES THE MFD SUPPOSE TO REMAIN ON ALL THE TIME? AND IF SO DOES ANYONE HAVE ANY IDEA ON HOW TO LOCK IT? WE LIVE ON THE WATER AND LEAVE THE SKI AT THE PIER IN THE WATER, ANYONE COULD PULL UP AND PULL THE LITTLE SWITCH OUT AND IT WOULD CRANK RIGHT UP. JUST WANDERED WE JUST BOUGHT IT AND IT DIDN'T HAVE A MANUAL. THANKS.............
07-18-2008, 12:35 PM #2
on mine clock aways on, comes fully alive after starting. minimal draw.
use a cable lock or get a battery cut off switch (keyed)
07-18-2008, 01:02 PM #3
you should be able to lock it with the mfd. Hold it down for a few seconds and release it should say enter code, 4 digit code factory setting is 1234 if it was changed like mine and orig owner did not know it I had to enter numbers until I found it.
07-18-2008, 01:49 PM #4
- Join Date
- Jul 2007
- near Toronto, Canada
Both the owners manual and the 2002 Service Manual describe how to use the MFI lock feature.
You set the security code to your own number first (you will enter this code twice, after entering the old code).
Once the security code has been set to your own code, THEN you can use the lock feature of the MFI, per the manual.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 32DegH2O in forum Polaris ClassifiedsReplies: 2Last Post: 10-23-2012, 11:14 AM
By MS.SHORTY in forum Polaris How To & FAQsReplies: 3Last Post: 09-03-2007, 01:40 PM
By GarageDetailer in forum Polaris Open DiscussionReplies: 12Last Post: 06-23-2007, 09:55 PM
By tccmi in forum Polaris Open DiscussionReplies: 2Last Post: 06-08-2007, 02:43 PM
By prt in forum Polaris Open DiscussionReplies: 5Last Post: 03-30-2007, 09:12 PM