Thread: stock RXP intercooler onto GTX
07-19-2008, 09:42 AM #1
stock RXP intercooler onto GTX
will a stock rxp intercooler fit onto a gtx? does the intake manifold on a gtx have a removable block off cover where the intercooler would go?
the gtx has a 17 tooth sc gear as opposed to a 16 tooth gear on the rxp, how would this affect things? need to change the supercharger gear?
07-19-2008, 03:45 PM #2
You would be better off with an external IC like the XS IC. To be able to run the RXP/RXT 16-tooth gear, you would need to change your GTX flywheel to a RXP/RXT flywheel... Ron
07-19-2008, 08:54 PM #3
- Join Date
- May 2008
If you have both a gtx and an rxp, I think you could swap the intake manifolds and you would not have to use stock IC block off on the rxp and run an external IC on the RXP.
07-19-2008, 09:00 PM #4
- Join Date
- Oct 2005
there is more to it to make it run correctly and reliably...
rotax racing 58psi fuel pressur reg
water reducer disc between the pump and pump support are calibrated differently, RED, VS Yellow, and now Green...
07-19-2008, 11:48 PM #5
Thanks For The Responses. My Ski Is Modified & Was Wondering If My Old Stock Parts Would Work On A 185hp Gtx Of A Friend Of A Friend. I Did Not Want To Let Him Have Them If They Would Not Work, Giving Him Alot Of Grief.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Pale Rider in forum Sea Doo Open DiscussionReplies: 2Last Post: 04-30-2013, 09:19 PM
By linuxglobal in forum Sea Doo ClassifiedsReplies: 2Last Post: 08-08-2010, 07:16 PM
By NJMatt50 in forum Sea Doo ClassifiedsReplies: 3Last Post: 08-08-2008, 11:17 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 37Last Post: 11-26-2006, 06:41 PM
By suck my wake in forum 4-Tec PerformanceReplies: 4Last Post: 04-20-2006, 01:31 AM