Results 1 to 7 of 7
  1. #1

    Join Date
    Jul 2007
    Location
    Cleveland, Ohio
    Posts
    43

    P 0544 Error....Exhaust

    I am having an issue with my rxp. The trouble code says that it is a damaged sensor and/or wiring. It only throws the warning in high RPMs. What could have caused this and what needs to be done to fix it?


  2. #2
    Mrs.Snoman's Avatar
    Join Date
    Nov 2007
    Location
    Shorewood,IL
    Posts
    3,797
    +1
    9
    It sounds like your lacking water to the waterbox.not getting enough at high RPMs..could be a clogged IC or a pinched line or maybe even your pissers could be pinched off by the coupler on the J-pipe.

  3. #3

    Join Date
    Jul 2007
    Location
    Cleveland, Ohio
    Posts
    43
    What is the best way to clean out my IC? All of the hoses are fine so thats what I'm thinking is wrong. Also is it unusual to have a lot of water coming out of the right bailer tube but not the left after a ride?

  4. #4
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Well depending on how clogged it may be, i had reverse flushed mine.I had minimal sediment come out of mine.Jerry recomends a cleaner and i cant remember what it is off hand i will find out for ya if you want..BUT you might also have a loose hose..Check all your cooling hoses make sure they are all tight and have no holes in them.Also i would recomend running a strainer on your IC line to prevent any further debri from getting ito your IC in the future..

  5. #5
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Heres the thread on cleaning IC..Hope this helps out also:

    http://www.greenhulk.net/forums/showthread.php?t=15167

  6. #6

    Join Date
    Jul 2007
    Location
    Cleveland, Ohio
    Posts
    43
    I have a Groco but I cannot figure out a good place to mount it. I will check the cooling hoses.

  7. #7
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Mounting it is all personal preferance..I will enclose a pic of were i mounted mine..
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN1603.JPG 
Views:	97 
Size:	755.2 KB 
ID:	83933   Click image for larger version. 

Name:	DSCN1604.JPG 
Views:	96 
Size:	745.6 KB 
ID:	83934  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 11
    Last Post: 09-11-2013, 01:29 PM
  2. Exhaust Error Code
    By InsideTrader in forum 4-Tec Performance
    Replies: 15
    Last Post: 08-09-2013, 11:42 AM
  3. Error code P-0544!
    By nsschwenk in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-16-2012, 10:35 AM
  4. speedometer error rate -newbie
    By jonstephens in forum 4-Tec Performance
    Replies: 26
    Last Post: 05-11-2005, 12:52 PM
  5. Exhaust manifold / header
    By Vern in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-08-2005, 08:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •