07-20-2008, 05:47 PM #1
NEW RESUITS Engine/Race Tech 3mm Wheel
This is in a 215 Sportster GPS 65.5mph back 65.2 air 70 degees water 75 degees. Pet 2100 tack 8180 rpm boost 12lbs 48 lbs inj 14/19 + 3mm need to add 1/2mm to wheel .A/FR 12.0 wot R R 55c thermostat R D X grate R R intercooler 4" air intake . STOCK SPEED GPS 56mph THANKS GORD www.racetechpowersports.com forgot to add race tech FPR at 55lbs
Last edited by iron head; 07-20-2008 at 07:08 PM.
07-20-2008, 06:40 PM #2
Good work Gord...you got 2+ extra mph with the SC wheel!!
07-20-2008, 06:51 PM #3
Hi Mark GREAT weekend $250 in gas. I need MORE. Going to mark on momday I will see how he made out with yours. need new catch can
07-20-2008, 06:55 PM #4
It rained in the city all weekend...must of been better up north. I will be stopping by Mark's shop later on in the afternoon to pickup the MONSTER. He will be testing it out sometime tomorrow depending on the weather.
I am hoping for some good results!
I might see you there
07-20-2008, 07:17 PM #5
Sat 90 degees Sun 70 degees with some rain. Maybe I need rotax racing ECU and valve tain to get to 70 mph. wife will KILL ME O well
07-20-2008, 07:23 PM #6
Go for it...that will get you really close to 70.
07-21-2008, 01:56 PM #7
- Join Date
- Jan 2007
- Lakeland, FL
Amazing work, Gord. I'm really amazed you're still able to use a 14/19 for those speeds. I loved the accel of the 14/19, but could only see 60.5mph with +3mm and still on the limiter (back in the S3 SC days). What's keeping you from putting a 15/20+2mm on there?
Also appreciate the heads up on the R&D "X" grate. It fits perfectly, with no grinding... because the last grate already ripped out the part of the shoe that it would have touched. Fills in the missing area good enough that I might not need a new pump shoe now. I won't be able to test until I finish my thru-hull project next week.
07-21-2008, 07:58 PM #8
Hi Scott I;am getting a new nozzle again 81 82.82 works great . Broke last nozzle. If you get the same boost 12lbs i would put 48 inj in set fpr at 55lbs A/FR should be at 12.1 8180rpm
07-21-2008, 08:01 PM #9
Is this the new 140mm wheel w/ 3mm spacer, or 137mm w/ 3mm?
07-21-2008, 08:07 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By powertek in forum 4-Tec PerformanceReplies: 133Last Post: 12-21-2008, 08:49 PM
By motorsport17 in forum 4-Tec PerformanceReplies: 24Last Post: 07-14-2008, 09:40 PM
By rotax racing in forum Sea Doo Open DiscussionReplies: 47Last Post: 03-30-2006, 10:48 PM
By two2curupt in forum 4-Tec PerformanceReplies: 20Last Post: 11-21-2005, 08:08 PM
By two2curupt in forum 4-Tec PerformanceReplies: 10Last Post: 06-27-2005, 07:45 AM