Thread: WaterBox Question.
07-21-2008, 01:59 PM #1
How many here are running the Rotax WaterBox?
Is it worth spending $400 dollars on?
07-21-2008, 02:58 PM #2
- Join Date
- Nov 2007
- Odessa, TX
07-21-2008, 03:45 PM #3
As far as i know thw rotax box is just an empty box with the inlet and outlet in the same place as the stock box. So you could do what i have done and shorten and gut that box. My box is around 6 iches shorter and completly gutted. I have cut the j pipe back by 1.75 inches and cut the outlet pipe inside the box all the way back. Im also running a through hull. My set up sounds awsome!!! and no problems so far. This should be a cheaper option if you can do the cuting and gutting yourself and then get somebody to weld it up again. R88
07-21-2008, 05:11 PM #4
- Join Date
- May 2007
- Auckland, New Zealand, New Zealand
07-21-2008, 06:01 PM #5
I gutted my box with a plama cutter and had a friend wld it back together and i picked up 100rpm on my na ski def worth it if you know someone with a tig welder only cost me a case of beer
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By rlharrison60 in forum Polaris Open DiscussionReplies: 16Last Post: 03-09-2008, 12:38 AM
By NeverEndn in forum 4-Tec PerformanceReplies: 7Last Post: 05-02-2007, 12:13 PM
By gorilla03 in forum Polaris PWC PerformanceReplies: 6Last Post: 12-08-2006, 09:06 AM
By North49 in forum 4-Tec PerformanceReplies: 9Last Post: 10-23-2006, 11:23 AM
By GeoRXT in forum 4-Tec PerformanceReplies: 8Last Post: 08-15-2006, 01:48 AM