07-22-2008, 10:52 AM #1
- Join Date
- Jul 2008
Riva EFI what are the best settings for the EFI?
HEY guys whats up I have an 06 GP1300r and I have the full set of Riva Racing Stage I kit i have as well the Riva Yamaha EFI and wanted to know what the best settings are for the EFI so I can get maximum performance out of my ski Please help!
07-22-2008, 11:19 AM #2
07-22-2008, 12:58 PM #3
I'd say 3316 if you are running the stock head.
FYI.. if you are just running a stage one kit your boat will not go 74 mph.
07-22-2008, 01:34 PM #4
07-22-2008, 03:03 PM #5
trued 14/20 Dynafly
Riva Power Filter w/o Outerware
Jetworks flow control
Riva EFI Controller 2216.5
stock tabs unshimmed
garmin forrunner 201
No holes filled
GPS 72.5 mph consitantly
Last edited by GPryan; 07-22-2008 at 03:06 PM.
07-22-2008, 03:03 PM #6
+1 I don't think you would get 74 with just a stage 1 kit. I can get consistent 70's all the time (without the efi controller), best of 70.6. Would I gain anymore speed with the controller installed?
07-22-2008, 03:10 PM #7
My compression is stock, but I am still running a controller. I forget what it is set at, and I tried just now to pull it out, but I guess I bought the super velcro. LOL
07-22-2008, 03:11 PM #8
dang GPryan, I have similar mods to you (minus the jetworks and my DF isn't trued) and I can't even get close to that....nice numbers.
07-22-2008, 03:13 PM #9
The only two things on my boat that have given me speed are the plate and prop.
Speeds are like this:
Added more angle to plate 72.5
07-22-2008, 03:15 PM #10
Well even your stock speed was faster than mine, I only got 64 .
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bossplayer5 in forum Yamaha How To & FAQsReplies: 0Last Post: 08-07-2011, 09:37 PM
By Noob in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 09-05-2009, 01:35 PM
By wave15stx in forum Kawasaki PWC Performance (4-stroke)Replies: 6Last Post: 06-12-2007, 11:17 AM
By LiquidDI in forum Sea Doo Open DiscussionReplies: 7Last Post: 03-10-2006, 01:17 AM
By Phil in forum 4-Tec PerformanceReplies: 4Last Post: 07-28-2005, 07:10 AM