Thread: Diamond pistons for RXP
07-23-2008, 01:04 PM #1
Diamond pistons for RXP
Here are the pics I said I would post.
You can go lower in compression if you want and you can go Higher
These have only 7cc more dish volume than the factory piston.
They have much thicker ring lands look at the top one. These pistons will take 250 hp per cylinder!!
07-23-2008, 01:06 PM #2
07-23-2008, 02:34 PM #3
07-23-2008, 02:44 PM #4
- Join Date
- May 2006
- Schenectady, Ny
sweet lookin ashtrays man, for real.
07-23-2008, 03:05 PM #5
07-23-2008, 03:29 PM #6
- Join Date
- Jun 2008
When you say you can go lower or higher compression you mean you can order them in lower or higher compression.
07-23-2008, 07:45 PM #7
Don't care much for diamond!!! I JE or CP are a better choice!!
Mahle makes great pistons too. But the wait is a long one!!
07-23-2008, 11:44 PM #8
07-23-2008, 11:52 PM #9
And by the way its a custom piston if I order it and you order it from cp at the same time I guarantee you they will be different.
This piston has lateral gas ports to help the ring seal under high pressure and thick ring lands and maximum lightening package underneath. It also has an inboard pin design. They also Have ultra flat ringlands which happen to make more power.
And the factory pistons are Mahle they are the same as JE SRP Pistons Cheap but do the job TO A CERTAIN EXTENT.
07-24-2008, 04:14 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mtuned in forum Sea Doo ClassifiedsReplies: 5Last Post: 11-30-2011, 03:09 PM
By MoTeC_Master in forum Yamaha PWC Performance (4-stroke)Replies: 2Last Post: 05-15-2011, 01:35 PM
By kenshin89 in forum Sea Doo ClassifiedsReplies: 2Last Post: 11-18-2010, 10:45 AM
By developerjj in forum Sea Doo ClassifiedsReplies: 0Last Post: 03-03-2010, 01:28 AM
By Jeff C in forum 4-Tec PerformanceReplies: 1Last Post: 05-19-2005, 04:26 PM