Results 1 to 2 of 2
  1. #1

    Splitting top and bottom deck

    Has anyone split the decks of a RXP or RXT?

    I know there are rivets around the joint but is it glued as well?

    Could I just drill the rivets out and pull the decks apart?


  2. #2

    Join Date
    May 2005
    Location
    ocean nj
    Posts
    781
    +1
    15
    Quote Originally Posted by 74mjh View Post
    Has anyone split the decks of a RXP or RXT?

    I know there are rivets around the joint but is it glued as well?

    Could I just drill the rivets out and pull the decks apart?
    The rivets hold the moulding on and the glue bonds the top and bottom together it is very tough stuff.Not a very easy job to do.You would need to either use heat to seperate the glue or cut it with a abrasive wheel and a reciprocating saw.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mixing and Matching top and bottom half of blocks
    By Pyro in forum 4-Tec Performance
    Replies: 1
    Last Post: 05-31-2013, 09:27 AM
  2. FS fxho water box, oil cooler top and vx oil cooler bottom
    By spyder3000gtvr4 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 08-23-2011, 09:28 PM
  3. Mismatch case tops and bottoms (y or n)
    By ctct2118 in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 08-16-2009, 04:04 PM
  4. 750sx fresh top and bottom w/ pipe 1000.00
    By chopper901 in forum Kawasaki Skis
    Replies: 1
    Last Post: 11-18-2008, 06:49 PM
  5. GP1200 can u mix top and bottom case from different 1200s
    By yacser1 in forum Yamaha Open Discussion
    Replies: 1
    Last Post: 03-10-2008, 09:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •