Thread: wrong hole drilled pics
07-26-2008, 08:16 AM #1
wrong hole drilled pics
Here are some pics of the hole that was drilled in the wrong place and plugged.He had two sets of instructions(fercho and Carls)and got a little mixed up.Is this gonna hurt anything and from the pics does everything look good.
07-26-2008, 08:55 AM #2
The Jetworks valve is installed backwards it should point at the pipe. otherwise you look fine. you should set the valve to open at 3500 rpm do this with the ski on the trailer and backed into the water. you have to disconect the hose going into the pipe and point it overboard when you adjust.
Last edited by OsideBill; 07-26-2008 at 08:58 AM.
07-26-2008, 09:11 AM #3
So disconnect the hose closest to the pipe and just put a piece long enough to get it outside the ski?That makes sense its where the water comes out. Im such a dumbass sometimes.
07-26-2008, 09:29 AM #4
07-26-2008, 09:36 AM #5
Thanks so much for the help. I cant wait to get it out on the lake today.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By gixxer130 in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 07-24-2008, 11:07 AM
By DooVa in forum 4-Tec PerformanceReplies: 5Last Post: 06-28-2008, 01:58 PM
By JLewis in forum 2-Stroke PerformanceReplies: 7Last Post: 07-25-2007, 07:11 AM
By WATER WOODY in forum Yamaha Open DiscussionReplies: 9Last Post: 12-13-2006, 11:11 PM
By ABBOTT in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 01-09-2006, 11:18 AM