Thread: How to flush a 2005 RXP
07-24-2006, 12:08 PM #1
- Join Date
- Jul 2006
- Owensboro, KY
How to flush a 2005 RXP
Hey I'm new so please take it easy. After riding in freshwater I always like to flush my motor (thats what I always did with my old 150 merc EFI) anyway how do you do it on this seadoo... I have read the manual and the pictures are so bad you can't tell where to screw the hose in.
Any help would be greatly appreciated.
07-24-2006, 12:15 PM #2
Welcome to the forum. No problem asking questions like that. You have come to the right place.
You dont need to screw it in . There is a quick connect at the back either to the right or left side of the reverse bucket. I have an rxp and rxt and the connectors are on different sides so I dont remember which is which but you will see it.
The PWC should have come with a flush kit.
I hook it up to the hose and then snap it in place on the ski. Then I turn on the ski and then turn the water on. And then when I am done I shut off the water then shut off the ski.
Make sure you do it in that order. I think the manual tells you how long to do it. I usually run it about 4 to 5 minutes, especially after running in salt.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By macGruber in forum 4-Tec PerformanceReplies: 0Last Post: 07-06-2012, 11:13 AM
By bmac in forum 4-Tec PerformanceReplies: 1Last Post: 03-25-2012, 04:47 PM
By pantydropper in forum 4-Tec PerformanceReplies: 1Last Post: 07-03-2010, 05:35 PM
By Atliens in forum 4-Tec PerformanceReplies: 16Last Post: 03-22-2009, 07:47 AM
By KeithKman in forum 4-Tec PerformanceReplies: 9Last Post: 05-27-2008, 10:37 PM